WORCAM PETG Yellow, 1 kg

Product Description

WORCAM PETG Yellow 1,75 mm, 1 kg is a universal PETG filament from the Czech brand WORCAM in an attractive yellow color. It follows the proven parameters of the WORCAM PETG White 1.75 mm, 1 kg variant – the same material formulation, the same geometric precision, only the color is different.

PETG combines the advantages of PLA and ABS – excellent strength, toughness, higher temperature resistance, and easy print setup. It is suitable for both home and professional use, from functional technical parts through brackets, covers, workshop components to design and decorative models.

The filament is wound on a 1 kg spool compatible with Bambu Lab AMS, so you can easily use it even in automatic feeders of multi-material systems.

Key Features

• PETG Material – polyethylene terephthalate with glycol modification for better printing properties
• Diameter 1.75 mm with a precision of ±0.03 mm for smooth extruder operation
• Weight 1 kg of net filament on the spool
• Rich Yellow color – highly visible functional parts, markers, safety elements
• Low warping and good layer adhesion, suitable even for larger models
• Higher temperature resistance than PLA, suitable for functional parts in normal environments
• 1 kg spool compatible with Bambu Lab AMS
• Suitable for most FDM/FFF 3D printers with a filament diameter of 1.75 mm

Recommended Print Settings

Specific values may vary slightly depending on the printer, nozzle, cooling, and model geometry. The parameters listed below are based on technical data for the WORCAM PETG series (e.g., White variant).

• Nozzle temperature: approx. 230–250 °C
• Bed temperature: approx. 70–85 °C
• Print speed: commonly 40–70 mm/s, depending on the required quality
• Fan: medium intensity (often 30–60%) – for a better surface without compromising layer adhesion
• Print bed: glass, PEI, textured PEI, BuildTak, and similar surfaces; recommended to use an adhesive / separator depending on the bed type

Typical Uses

• Functional and technical parts (brackets, covers, mounts, assembly fixtures)
• Workshop tools, organizers, aids for hobby and professional use
• Design and decorative objects where an intense yellow color is needed
• Prototypes and small series of products
• Interior parts requiring a combination of strength and durability

Advantages of PETG compared to PLA and ABS

• Compared to PLA: higher temperature resistance, higher toughness, greater resistance to impacts and chemicals
• Compared to ABS: lower odor during printing, less warping and cracking, easier printing, usually no enclosed chamber required

Storage and Filament Care

Although PETG is less sensitive to moisture than some other materials, for long-term top print quality we recommend:

• Keep the spool dry, ideally in a resealable bag or box with silica gel
• After printing, secure the end of the filament in the hole in the spool to prevent tangling
• If moisture contamination is suspected, gently dry it in a filament dryer or a dehydrator with precise temperature control (usually around 55–60 °C for several hours)

Compatibility

• Suitable for all common FDM/FFF 3D printers using 1.75 mm filament
• The spool dimensions correspond to the standard compatible with Bambu Lab AMS

Summary

WORCAM PETG Yellow 1,75 mm, 1 kg is a reliable, easy-to-print PETG filament with precise geometry and an excellent ratio between strength, toughness, and printing simplicity. Thanks to its rich yellow color, it is suitable for both functional parts and safety markings, warning elements, or design models that need to be highly visible.

Key Features:

• Czech PETG filament from the brand WORCAM in a rich yellow color
• Diameter 1.75 mm with a precise tolerance of ±0.03 mm for reliable extruder operation
• 1 kg spool compatible with Bambu Lab AMS
• Combination of strength, toughness, and good temperature resistance
• Low warping and very good layer adhesion for trouble-free printing
• Suitable for functional, technical, and design parts and prototypes
• Easy print setup – recommended nozzle temperature approx. 230–250 °C and bed temperature 70–85 °C
• Universal use on most FDM/FFF 3D printers with 1.75 mm filament