WORCAM PETG Orange 1kg

WORCAM PETG Orange 1.75mm, 1kg

PETG filament WORCAM Orange is a universal material for more demanding functional parts and attractive colored models. It combines easy printing similar to PLA with better thermal resistance and toughness.

Main advantages of PETG WORCAM

• Excellent strength-to-flexibility ratio – suitable for mechanically stressed parts, holders, covers, and technical components.
• Higher temperature resistance than PLA – for parts used in warmer environments (car interiors, proximity to heat sources, etc.).
• Low shrinkage and good layer adhesion – minimizes deformation and cracking of prints.
• Easy printing without significant odor – comfortable use even in domestic conditions.
• Stable orange color – a distinct, highly visible shade suitable for safety elements, prototypes, and design models.

Recommended printing parameters

Parameters are based on the WORCAM PETG filament line and common settings for quality PETG printing:

• Nozzle temperature: 230–245 °C
• Bed temperature: 75–85 °C
• Recommended printing speed: around 80 mm/s
• Filament diameter: 1,75 mm
• Diameter tolerance: ±0,05 mm
• Tested with nozzle: 0,4 mm
• Weight on spool: 1 kg
• Spool compatible with: Bambu Lab AMS

Always adapt specific settings to your printer, cooling, and print geometry. For PETG, milder cooling than for PLA and a stronger adhesive first layer are usually recommended.

Typical uses for PETG WORCAM Orange

• functional prototypes and technical parts
• holders, mounts, electronics covers
• parts requiring toughness and impact resistance
• outdoor elements protected from direct UV radiation
• safety and warning elements thanks to the distinct orange color

PETG Material Properties

• combination of PLA properties (easy printing) and ABS (higher thermal and mechanical resistance)
• higher resistance to moisture and chemicals than PLA
• very good layer adhesion, parts are less brittle

Tips for successful printing

• Print on a heated bed (glass, PEI, textured sheet), or use glue or spray for better adhesion.
• Limit drafts around the printer – you will reduce the risk of deformation for larger prints.
• In case of stringing with PETG, try slightly increasing retraction and lowering the temperature within the recommended range.
• Store the filament in a dry place, ideally in a sealable box or with a moisture absorber.

WORCAM PETG Orange 1.75mm, 1kg is a reliable filament for users looking for a durable, universal material in a highly visible orange color – suitable for both everyday printing and functional prototypes and practical parts.

Key features:

• Universal PETG filament suitable for functional and design prints
• Distinct orange color for highly visible parts and safety elements
• Easy printing similar to PLA, but with higher temperature resistance and toughness
• Stable diameter of 1,75 mm with a tolerance of ±0,05 mm for reliable filament feeding
• Verified trouble-free printing with a 0,4 mm nozzle
• Recommended printing speed around 80 mm/s for fast and high-quality printing
• Spool compatible with the Bambu Lab AMS system
• Low shrinkage and very good layer adhesion – less risk of print deformation