WORCAM PETG Reddish Brown 1kg

WORCAM PETG Reddish Brown 1kg – durable filament for everyday use

WORCAM PETG in a reddish brown shade is a high-quality filament designed for reliable 3D printing of functional and aesthetic parts. PETG material combines the ease of printing similar to PLA with mechanical resistance approaching ABS. Thanks to low shrinkage during printing, it is also suitable for larger models and precise technical parts. The reddish brown color gives your prints an elegant yet subtle look – great for design accessories, electronics covers, holders, jigs, or models for hobby and professional use.

Main advantages of WORCAM PETG material

• High toughness and strength – suitable for mechanically stressed components, holders, jigs, and functional parts.
• Better thermal resistance than PLA – parts deform less at higher operating temperatures.
• Low shrinkage and warping – models adhere well to the bed, filament is suitable for larger prints.
• Easy printing similar to PLA – no closed chamber required, printing can be handled even by intermediate users.
• Consistent filament diameter – stable feeding and uniform layers for high-quality print surface.
• Universal use – compatible with most common FDM/FFF 3D printers using a diameter of 1.75 mm.

Recommended use

WORCAM PETG Reddish Brown is especially suitable for:

• functional and structural parts (holders, grips, jigs, parts for 3D printers)
• covers and boxes for electronics
• technical models, prototypes, and small series of parts
• decorative and design elements, interior accessories

Recommended print settings

Specific values may vary slightly depending on the printer type, hotend, and cooling. Take them as initial recommendations and fine-tune if necessary.

• Nozzle temperature: approx. 230–250 °C
• Bed temperature: approx. 70–85 °C
• Print speed: approximately 40–60 mm/s
• Fan: medium power (lower than for PLA, for better layer adhesion)
• Bed: glass, PEI, textured sheet, etc. – recommended to use a suitable adhesive (glue, spray, etc.)

Technical parameters of the filament

Parameter	Value
Material	PETG
Color	Reddish Brown
Filament diameter	1.75 mm
Spool weight	1 kg (material on the spool)
Diameter tolerance	approx. ±0.05 mm (typical for WORCAM PETG)
Recommended nozzle temperature	230–250 °C
Recommended bed temperature	70–85 °C
Print type	FDM / FFF
Recommended cooling	30–70 % depending on model geometry
Suitable for	Most 3D printers with 1.75 mm diameter

Tips for achieving high-quality print

• Before printing, check nozzle cleanliness and bed condition; PETG adheres better to a degreased surface.
• In case of excessive adhesion to the bed, lower the first layer temperature or use a release layer (e.g., glue stick).
• For higher part strength, increase the nozzle temperature and slightly reduce cooling.
• For bulky prints, consider lower speed and higher bed temperature to minimize warping.

WORCAM PETG Reddish Brown 1kg is the ideal choice for anyone looking for a universal, durable, and easy-to-print filament for everyday use in the workshop, laboratory, and home 3D printing.

Key features:

• Czech PETG filament in an attractive reddish brown color for functional and design prints.
• High strength and toughness – suitable for mechanically stressed and structural components.
• Better thermal resistance than PLA, while maintaining relatively easy printability.
• Low shrinkage and good bed adhesion – suitable for larger and precise models.
• Stable filament diameter for smooth feeding and quality print surface.
• Universal use in most FDM/FFF 3D printers with a diameter of 1.75 mm.