WORCAM PETG Red 1kg

WORCAM PETG Red 1kg

WORCAM PETG Red is a universal filament for FDM/FFF 3D printers that combines the strength and toughness of ABS with easy printing similar to PLA. The deep red color is ideal for functional parts, covers, holders, and decorative models where higher thermal and mechanical resistance is required.

Main advantages

• PETG Material – durable, tough plastic for everyday and technical use
• Deep red color – bold, highly visible parts, also suitable for safety and signaling elements
• Easy printing – lower risk of deformation than ABS, suitable even for standard home printers
• Good layer adhesion – strong functional parts that withstand mechanical stress
• Low shrinkage and warping – stable print dimensions
• Standard 1 kg spool – suitable for most common spool holders and closed systems

Recommended use

• functional components, grips, holders, and fixtures
• electronics covers, technical and machine parts
• interior parts, organizers, furniture accessories
• design and decorative models in red color

Print settings (indicative)

Specific temperatures may depend slightly on the printer and conditions; these values are a suitable starting point:

Parameter	Recommended value*
Nozzle temperature	230–245 °C
Bed temperature	70–80 °C
Print speed	40–70 mm/s
Cooling	low to medium (0–50 %)

*For best results, we recommend performing a test print and fine-tuning settings according to your specific printer.

PETG material properties

• higher thermal resistance than PLA
• good impact and crack resistance
• less prone to moisture than some other materials, yet dry storage is recommended
• suitable for long-term use in common environments

Storage recommendations

• keep filament dry, ideally in a resealable bag with desiccant
• protect from direct sunlight and higher temperatures

WORCAM PETG Red 1kg is a reliable choice for users looking for a durable, easy-to-print filament in an attractive red color for everyday and technical use.

Key features:

• Czech PETG filament on a 1kg spool for everyday and technical use
• Deep red color for bold, highly visible functional and design parts
• Easy printing with low shrinkage and minimal warping compared to ABS
• Good layer adhesion for strong and tough functional components
• Universal diameter 1.75 mm with typical tolerance ± 0.03 mm
• Suitable for most home and professional FDM/FFF 3D printers