WORCAM PETG Brown 1 kg

WORCAM PETG Brown 1 kg

Brown PETG filament from the Czech brand WORCAM is an ideal choice for users looking for a durable, dimensionally stable yet easy-to-print material for everyday 3D printing. It combines the advantages of PLA (easy printing) and technical plastics (higher strength and heat resistance), making it suitable for both functional parts and design models in a pleasant brown color.

Just like other WORCAM PETG filaments, it offers consistent diameter, quality winding, and proven print settings, so you can quickly achieve reliable results on most FDM/FFF printers.

Main advantages of WORCAM PETG Brown

• Universal PETG filament of a Czech brand – suitable for hobby, office, and professional use
• Brown color – ideal for technical parts, mock-ups, covers, decorations, and models with an "earthy" look
• Higher mechanical resistance than PLA – withstands stress, bending, and impacts better
• Better heat resistance compared to PLA – suitable for parts exposed to higher temperatures (e.g., in car interiors, electronics, etc.)
• Low shrinkage and good bed adhesion – lower risk of warping edges and model detachment
• Easy printing for beginners and advanced users – similar settings to PLA, just with higher nozzle and bed temperatures
• Standard 1.75 mm diameter and 1 kg spool – compatible with the vast majority of FDM/FFF 3D printers

Recommended Use

WORCAM PETG Brown is particularly suitable for:

• functional and mechanically stressed parts
• prototypes and small series of products
• holders, grips, brackets, and technical covers
• workshop equipment, fixtures, assembly and positioning aids
• decorative and design models in natural/earthy tones

Recommended Print Settings

Note: Specific values may vary depending on the type of printer, nozzle, slicer profile, and environmental conditions. Take these as a starting point and fine-tune by test printing.

• Nozzle temperature: approx. 230–250 °C
• Bed temperature: approx. 70–80 °C
• Print speed: approximately 30–80 mm/s
• Cooling: low to medium (approx. 30–70 % depending on part geometry)

For better bed adhesion, we recommend using a quality print surface (PEI, glass with suitable adhesive, textured sheet, etc.) and checking the first layer calibration.

Material Properties of PETG

• Material type: PETG (polyethylene terephthalate-G)
• High toughness and impact resistance
• Good chemical resistance to a range of common substances
• Lower brittleness than PLA, the material has slight flexibility
• Less prone to deformation than ABS – suitable even for larger models

Properly printed PETG parts are suitable for long-term technical use, various holders, functional mechanical elements, and parts exposed to varying temperatures.

Storage and Filament Care

PETG is less hygroscopic than, for example, nylon, but it still gradually absorbs moisture from the air. For stable results, we recommend:

• storing the filament in a closed bag or box with desiccant
• for long-term storage outside the packaging, use a filament dryer or a food dehydrator (approx. 55–65 °C for several hours)
• if there are signs of popping during printing, a rough surface, or "bubbles," dry the filament before printing

Technical Specifications

Who is WORCAM PETG Brown ideal for

• Beginner, who wants to switch from PLA to a more durable material without a major increase in printing difficulty
• Advanced user, who prints functional parts, holders, covers, or parts for the workshop and home
• Professional, who needs a reliable material for prototypes and small series of parts

WORCAM PETG Brown 1 kg represents a balanced ratio between ease of printing, strength, appearance, and price, making it a great choice as a "workhorse" filament for everyday use.

Key Features:

• Czech PETG filament of the WORCAM brand in brown for everyday use
• Higher strength, toughness, and thermal resistance than PLA – suitable for functional parts
• Low shrinkage and good bed adhesion, lower risk of warping for larger models
• Easy printing for beginners and advanced users, settings similar to PLA with higher temperature
• Standard 1.75 mm diameter and 1 kg spool compatible with most FDM/FFF 3D printers
• Universal use – prototypes, holders, covers, fixtures, and design models in an earthy brown shade