WORCAM PETG Metallic Green 1kg

WORCAM PETG Metallic Green 1kg – durable filament with an impressive metallic appearance

WORCAM PETG Metallic Green 1kg is a high-quality PETG filament designed for FDM/FFF 3D printers with a filament diameter of 1.75 mm. It combines the strength and toughness of PETG with a metallic green effect that gives your prints an attractive, glossy look.

Thanks to its stable composition, the filament has low shrinkage, adheres well to the build plate, and is less prone to warping. It is suitable for both functional and mechanically stressed parts as well as design models, decorations, cosplay accessories, and prototypes where the metallic effect stands out.

Main advantages of WORCAM PETG Metallic Green

• Metallic green appearance Attractive metallic green color with a glossy surface that looks impressive even without further post-processing.
• Higher thermal resistance than PLA Suitable for parts exposed to higher temperatures (e.g., in a car interior, near heat sources – within PETG limits).
• Tough and strong material Resistant to impacts and cracking, ideal for brackets, covers, functional components, and 3D printer parts.
• Low shrinkage and good dimensional stability Due to minimal thermal expansion, models do not warp and adhere well to the bed.
• Relatively easy printing Significantly easier to print compared to ABS, behaves similarly to PLA but offers better mechanical properties and durability.
• Compatible with common FDM printers Suitable for most 3D printers using 1.75 mm filament, including modern models and automatic feeding systems.

Recommended print settings

Parameters are based on typical values for WORCAM PETG filaments and similar PETG brands:

• Recommended nozzle temperature: 230–245 °C
• Recommended bed temperature: 75–85 °C
• Recommended printing speed: up to approx. 80 mm/s
• Filament diameter: 1.75 mm
• Diameter tolerance: ±0.05 mm

Specific settings may vary depending on the printer, hotend type, and cooling. For best results, we recommend:* printing the first layers slower and with turned off or limited cooling,

• using a clean and degreased build plate (glass, PEI, textured sheet), or an adhesive agent,
• storing the filament in a dry place, ideally in a resealable container or drybox.

Typical use of PETG Metallic Green

• Design and decorative models – figures, statues, logos, lettering, promotional and gift items.
• Covers and protective elements – electronics covers, boxes, sensor and camera mounts.
• Mechanically stressed parts – brackets, grips, mounting fixtures, 3D printer parts.
• Prototypes and functional samples – where a combination of durability, dimensional stability, and representative appearance is important.

Technical specifications

Who is WORCAM PETG Metallic Green suitable for

• Advanced beginners and intermediate users who want to switch from PLA to a more durable material.
• Hobby creators and modelers looking for an impressive metallic color for decorations and models.
• Manufacturers of prototypes and small series where a combination of appearance and functionality is needed.

If you are looking for a durable PETG filament with a distinctive metallic green appearance for everyday printing of functional and design parts, WORCAM PETG Metallic Green 1kg is a great choice for your printing equipment.

Key features:

• Metallic green, glossy appearance suitable for design and decorative models.
• Durable PETG with higher thermal resistance than PLA, suitable for functional parts.
• Tough material with good resistance to impact and cracking.
• Low shrinkage and good dimensional stability – models do not warp and hold well to the bed.
• Easier to print than ABS, suitable for most home and professional FDM 3D printers.
• Standard 1.75 mm diameter with ±0.05 mm tolerance for reliable extrusion.
• Suitable for brackets, covers, prototypes, decorations, and 3D printer parts.