Free shipping from 1 999 Kč
Are you just getting started with a Bambu Lab 3D printer? Learn how to work in Bambu Studio step by step – from installation and initial printer setup to practical tips on profiles, supports, and multicolor printing.
Bambu Studio is software based on PrusaSlicer by Prusa Research, which is based on Slic3r created by Alessandro Ranellucci and the RepRap community. Bambu Studio is modern, feature-rich software for preparing files for 3D printing, developed by Bambu Lab. It includes project-oriented workflows, systematically optimized slicing algorithms, and a user-friendly graphical interface, ensuring users a smooth printing process […]
Common problems When printing with engineering materials such as ABS, ABS-GF, ASA, PC, PA, PA-CF, PA6-CF, PA6-GF, PAHT-CF, PET-CF, PPA-CF, PPS-CF, etc., the following problems may commonly occur: Solutions and recommendations Wet PAHT-CF (left) vs. dry PAHT-CF (right) Wet PA6-GF (left) vs. dry PA6-GF (right) Drying recommendations The recommended drying parameters for each type of filament […]
This article provides a brief overview of Bambu Handy and a guide to help you quickly install, set up, and start printing right away. What is Bambu Handy? Bambu Handy is an all-in-one mobile application designed for Bambu Lab 3D printers. It allows you to remotely monitor and manage your 3D printers. Users can also easily start previous projects, make adjustments […]
Is the P1S chamber actively heated? No. The chamber temperature increases based on the heated bed temperature setting and cannot be precisely regulated. Is a filament buffer required for printing with a single filament? (For the X1 or P1 Series) When printing with a single filament spool, a buffer is not required because the filament spool itself can be considered a ‘buffer’. What […]
INTRODUCTION We have divided the FAQ for A1 mini into three sections: product specifications, product features, and product usage. PRODUCT SPECIFICATIONS What materials can A1 mini print? A1 mini is capable of printing a wide range of materials available on the market that do not require an enclosure. These materials include PLA, PETG, TPU, and their corresponding support filaments. It is not recommended to print filaments such as […]
Flow Calibration Guide from Bambu Studio Flow Rate About This Calibration Flow calibration measures the ratio between the expected and actual extrusion volume. This ratio is usually stable, and the default settings work well with Bambu Lab printers and official filaments that have been pre-calibrated and fine-tuned. Flow calibration is usually not necessary for regular filaments. It is important to […]
Instructions for performing flow dynamics calibration in Bambu Studio What is flow dynamics calibration? From fluid mechanics, we know that when a Newtonian fluid flows through an opening, it requires pressure, and the pressure is proportional to the flow rate. Filament, which is not a rigid body, will be compressed during extrusion to create the necessary pressure. This compression process causes a delay in the response of the actual flow rate, […]
