3D Stisk
Αρχική
Υπηρεσίες
    Obrázek 3d tiskárny, filamentu, náhradního dílu

    Bambu Lab PLA Basic Bronze - Refill without spool

    Obrázek 3d tiskárny, filamentu, náhradního dílu
    Náhledy obrázků

    Bambu Lab PLA Basic Bronze - Refill without spool

    €20.46€19.64
    €16.23 χωρίς ΦΠΑ
    Bambu Lab PLA Basic in Bronze color is an ideal choice for easy 3D printing. This refill filament without a spool is designed for ease of use and achieves consistently high-quality prints. It is optimized for high-speed printing and excellent appearance. It contains an RFID chip for intelligent printing with AMS (Automatic Material System), eliminating tedious setup. For optimal results, we recommend drying the filament.
    Διαθεσιμότητα:Περισσότερα από 5 τεμ

    Επεξεργαζόμαστε και αποστέλλουμε παραγγελίες άμεσα κατά τη διάρκεια της εργάσιμης ημέρας.

    €19.64

    Περισσότερα από 5 τεμ
    Κωδικός προϊόντος:6975337037361
    Κατηγορία:Filament, PLA
    Κατασκευαστής:Bambu Lab
    Ετικέτες:bambu-lab-pla-basic-refill

    Alternative products

    With Spool

    Bambu PLA Basic - Refill without spool

    图片加载失败文案

    User-friendly and easy to print

    Bambu PLA Basic is designed to be as user-friendly as possible, making it an ideal choice for beginners or those just starting out with 3D printing. What's more, PLA Basic allows users to achieve consistently high-quality prints without the need for extensive adjustments or advanced print settings.

    pla cf

    High print quality

    PLA filament from Bambu Lab stands out with high print speed and excellent appearance. Experience the benefits of smooth and flawless prints with outstanding quality that exceeds expectations.

    pla cf

    RFID for intelligent printing

    All printing parameters are embedded in the RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setup steps.
    图片加载失败文案

    Download

    pdfFilament TDS pdfFilament MSDS pdfFilament RoHS

    Printing Tips

    •Drying PLA Tough is optional. Recommended drying conditions are 55 ℃ for 8 hours in a dryer and 75 ℃ for 12 hours on a printer's heated bed. Learn more about filament drying. For further information, please refer to the Filament Drying Cover section on the WIKI.

    reusable spool