Free shipping from 1 999 Kč
With this printer you will receive one week of premium 3D printing chat support completely free. Our chat will help you with setup, first prints, and problem solving.
Bambu Lab A1 mini
A compact printer that is ready to print 20 minutes after unboxing. Full-auto calibration, multi-color printing with AMS lite and quiet operation.
Pre-assembled | Pre-tuned
The printer arrives assembled, squared and precisely tuned at the factory. Initial setup takes about 20 minutes, so you can start printing right away.
Full-auto calibration
The printer calibrates itself before every print. It measures the nozzle height above the bed, levels the bed, suppresses resonance and tunes nozzle pressure, all automatically.
Auto bed leveling | Auto Z-offset
The printer probes the bed with the nozzle itself and measures the exact first-layer height. No paper or manual knob turning needed.
Sensors in the toolhead and heatbed measure vibration on both axes before every print. The result is clean edges without ringing, even at high speed.
The algorithm calibrates flow dynamics from nozzle pressure. No test patterns to print and no best result to pick by hand.
The printer checks belt tension from the vibration frequency. If a belt is loose, it notifies you and the auto belt tensioner sets it right.
Loading and unloading filament is fully automated, with no manual temperature settings.
AMS lite
The all-new AMS lite is elegant and reliable, making multi-color 3D printing from up to 4 spools accessible to everyone. RFID sync applies the ideal profile for Bambu Lab filaments automatically.
AMS lite is included in the Combo variant.
Active flow rate compensation | Eddy current pressure sensor
A high-resolution, high-frequency sensor measures the pressure in the nozzle. The algorithm continuously compensates the flow rate, so extrusion stays accurate even in sharp corners.
10,000 mm/s² acceleration | 14-minute Benchy
All-metal rails, a rigid frame, a nozzle pressure sensor, accelerometers and advanced motion control. Together they print a 14-minute Benchy in good quality straight out of the box, without specialized filaments.
Touchscreen | Step-by-step guidance
A clear touchscreen interface walks you through everything you need. You do not have to be a 3D printing expert to use the printer.
Quick-swap hotend | Easy maintenance
The all-new quick-swap hotend pops in and out with a single clip. Replacing a nozzle or switching to another diameter takes moments.
Active motor noise canceling | Silent mode
Active motor noise canceling and silent mode bring the noise level below 48 dB. It is one of the quietest printers on the market, so it can print even in your living room.
Reliability | Covered drive system
All-metal linear rails and a covered drive system deliver Bambu Lab performance out of the box, consistent quality and long service life.
Prefer not to print through the cloud? In LAN mode you control the printer, watch the live view and send jobs on your local network only.
Block the camera with a simple mechanical slider. No sticker needed.
MakerWorld | Bambu Handy | Bambu Studio
MakerWorld offers thousands of models ready for your printer, and you start a print with one tap in the Bambu Handy app. You can also control the printer from Bambu Studio at any time.
Music from the motors | MIDI
The printer plays melodies without a speaker. It drives three motors at precise frequencies and plays up to three tracks at once. Convert your own MIDI file to G-code with the Bambu Lab web tool.
Bambu Lab A1 mini
Spool holder
Purge wiper
Build plate
PTFE tube
Bambu Lab filament samples 20 g
0.4 mm stainless steel nozzle (pre-installed)
Accessory box
Want to print with up to 4 colors? View the Combo with AMS lite
180 × 180 × 180 mm in a compact printer footprint.
Most filaments that do not need an enclosure: PLA, PETG, TPU and their support materials. ABS, ASA, PC, PA and PET, which require higher bed and chamber temperatures, are not recommended.
AMS is enclosed and AMS lite is open. AMS lite connects to A1-series printers directly. AMS, AMS 2 Pro or AMS HT connect to the A1 mini through the AMS HUB (SA013) accessory.
With AMS lite, up to 4 colors or materials in one model, one spool per slot.
About 20 minutes. The printer arrives pre-assembled and pre-tuned, so you only unbox it and follow the setup wizard.
