Bambu Lab A1 Mini 3D printer. Main features:

• Already assembled, pre-set, precisely aligned, just plug in and print.
• Active flow compensation (automatically calibrated pressure), precise extrusion in every corner.
• Active motor noise cancellation, less than 48dB in silent mode.
• Filament tangle and run-out monitoring, comprehensive filament feed assurance.
• Full metal linear rails and rigid frame, robust quality from day one and beyond.

Print area with CoreXY speed and quality. Full metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU unit, and above all, an advanced motion control system that uses these features to print a quality benchy model in 14 minutes, in accordance with all speed benchy rules, directly out of the box without the use of specialized filaments. Active Motor Noise Cancelling - The A1 mini can calibrate parameters to match small individual differences between each drive motor. This compensates for unwanted motor noise harshness. Active Flow Compensation - The A1 mini revolutionizes flow control in 3D printing. It uses a high-resolution, high-frequency eddy current sensor to measure nozzle pressure. Our algorithm actively compensates the flow according to measured values to extrude with precision. Full Automatic Calibration - The A1 mini handles various calibrations entirely independently. It carefully calibrates Z-offset, bed leveling, vibration resonance, and nozzle pressure for EVERY print job, automatically. Plug and Print - The A1 mini comes to you pre-assembled, precisely aligned, and pre-set with precision. Setting it up for your first print takes only about 20 minutes. Technical specifications:

• Build volume: 180x180x180 mm
• Hot-end: All-metal
• Nozzle: Stainless steel
• Max. nozzle temperature: 300 °C
• Nozzle diameter: 0.4 mm (included), 0.2 mm, 0.6 mm, 0.8 mm
• Build plate: Bambu Textured PEI Plate (included), Bambu Smooth PEI Plate
• Max. build plate temperature: 80°C
• Max. print speed: 500mm/s
• Max. tool head acceleration: 10m/s²
• Supported filament: PLA, PETG, TPU, PVA
• Not recommended filament: ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer
• Dimensions: A1 mini: 347x315x365 mm, Weight: 5.5 kg

What's in the box:

• Printer
• Accessory box
• Purge wiper
• Filament spool holder

[embed]https://youtu.be/OLY92evGpZc[/embed]