3D Stisk
Home
Services
Snapmaker

Snapmaker U1

Snapmaker U1 color 3D printer — main product photo (front three‑quarter view) in a studio/workshop setting.
Image thumbnails
Max. speed
300 mm/s
Build area
270 × 270 × 270 mm
Multi-color printing
Yes
Max. nozzle temperature
300 °C
€983.59€901.59-8 % · you save €82.00
Fast multi-color CoreXY 3D printer with SnapSwap tool-changing system for up to 4 independent print heads. Build volume of 270 × 270 × 270 mm, speed up to 300 mm/s per head and significantly less waste during multi-color printing. Automatic calibration, built-in camera, and remote management via Snapmaker Orca and mobile app.
Availability:Last 2 pcs!

We process and ship orders immediately during the business day.

Included free · Premium support for 1 week, SolidPrompt 3D editor for 1 year · See the editor

Compatible Accessories

  • KAIZUO Glue Stick for 3D Printers - PVP Glue for Print Bed€2.42
  • XCR3D Glue Stick for 3D Printers - PVP Bed Adhesive€2.42
  • Dimafix printing adhesive - spray 400ml€16.36
Product code:6971573442709
Manufacturer:Snapmaker

Our videos about this product

Play

Creality K3 vs Snapmaker U1 – Která je lepší?

More videos

Hromada barev z pouhých 4 filamentů – jak je to možné?

Snapmaker U1 - Vybalení/Unboxing, Nastavení a Tisk - Česky

Formnext 2025: Rychlá Tour! Prusa, Elegoo, Bambu Lab, Qidi, Snapmaker a další..

3D Tisk 2025: Nejžhavější novinky! Co nás čeká na FromNextu?

Snapmaker U1

Four toolheads. Swaps in 5 seconds.

Snapmaker U1 prints in multiple colors and materials. Instead of purging one nozzle, it swaps a complete preheated toolhead, so prints finish faster with up to 85% less waste.

Highlights

  • SnapSwap: 4 toolheads, 5 s swaps

    SnapSwap: 4 toolheads, 5 s swaps

  • Up to 85% less waste

    Up to 85% less waste

  • Rigid and flexible materials

    Rigid and flexible materials

  • Automatic calibration

    Automatic calibration

  • Smart print monitoring

    Smart print monitoring

  • Auto filament system

    Auto filament system

  • Optional Top Cover

    Optional Top Cover

  • Open ecosystem

    Open ecosystem

SnapSwap

The benchmark for toolchanging

Four independent, preheated toolheads switch colors or materials in just 5 seconds. No filament cutting, no lengthy purging and no needless waste.

4
independent toolheads
5 s
toolhead swap
1,000,000+
swaps tested with zero mechanical failures

Direct toolhead swaps

Each color or material stays loaded in its own toolhead. Instead of unloading, reloading and purging filament through a shared nozzle, the printer swaps the complete toolhead.

Precise locking, swap after swap

Steel-ball kinematic couplings guide each toolhead into the same position and a mechanical lock secures it. No extra motors required.

Up to 85% less waste

Multicolor printing without piles of waste

With conventional multicolor systems, purge waste often exceeds the material in the model itself. U1 swaps complete toolheads, so filament ends up in the print instead of the bin and every multicolor project costs less.

Castle Tower

Print time

  • Snapmaker U1 11 hr 43 min
  • Shared-nozzle printer 39 hr 55 min

Total waste

  • Snapmaker U1 87 g
  • Shared-nozzle printer 586 g

Snapmaker Lab tests. Total waste includes supports, the prime tower and nozzle clearing.

Multiple materials in one print

Pair rigid and flexible materials, blend TPUs of different colors and hardness, or print PETG and PVA supports. No cross-contamination and no needless waste.

PETG + TPU

Rigid and flexible in one piece: a modular bag by @variableseams.

Two kinds of TPU

TPU 95A HF and TPU 90A with different hardness in one clog.

Water-soluble PVA supports

A SnapSpeed PLA bridge on PVA supports that dissolve in water.

Engineering materials

ASA and PAHT-CF inside the enclosure of the optional Top Cover.

CoreXY | Carbon-fiber X axis

Speed on a solid foundation

A welded all-metal frame provides a stable base and the lightweight carbon-fiber X axis reduces moving mass. The compact CoreXY system keeps motion precise at high speed and through frequent toolhead swaps.

Speed on a solid foundation
500 mm/s
max toolhead travel speed
20,000 mm/s²
max acceleration
32 mm³/s
max hotend flow

Automatic calibration | 0.04 mm

Four toolheads aligned as one

U1 automatically calibrates the XYZ offsets between all four toolheads to within 0.04 mm, so colors, materials and support interfaces line up precisely. Input Shaping, Pressure Advance and automatic bed leveling take care of smooth walls and a reliable first layer.

Auto filament system

Keep up to four spools ready. U1 loads filament by itself, switches to a backup spool when one runs out and collects waste in one place.

Auto-loading

Insert the filament into the feeder and U1 loads it into the toolhead by itself.

Backup Mode

When a spool runs out, U1 automatically switches to a spool of the same filament.

Waste collector

Waste from swaps drops into a removable container for quick cleanup.

2 MP camera | AI detection

Capture the highlights, AI spots the mess

The built-in camera lets you watch prints remotely and record time-lapses. Together with over a dozen sensors, it monitors the print and alerts you or guides recovery when something goes wrong.

What U1 detects

  • Spaghetti

    Spaghetti

  • Build plate obstructions

    Build plate obstructions

  • Toolhead swap errors

    Toolhead swap errors

  • Air printing

    Air printing

  • Missing build plate

    Missing build plate

Optional accessory

Top Cover for ABS, ASA and more

The optional Top Cover creates a stable, enclosed environment. It retains heat for ABS and ASA and exhausts excess heat for materials that need a cooler chamber. In internal circulation mode, three-stage filtration reduces odors, VOCs and fine particles.

Top Cover for ABS, ASA and more
Room for big ideas

270 × 270 × 270 mm

Room for big ideas

The 270 × 270 × 270 mm build volume fits large models, batch printing and multi-part projects without giving up speed or the four independent toolheads.

Control from any device

Prepare models in Snapmaker Orca, handle everyday tasks on the touchscreen and monitor prints from anywhere in the Snapmaker App.

Snapmaker Orca

A slicer built on open-source Orca Slicer with U1 features such as Full Spectrum color mixing.

3.5" touchscreen

Files, filament setup and print progress right on the printer.

Snapmaker App

Monitor and control prints remotely from your phone.

In the box

Snapmaker U1 package contents
  1. Snapmaker U1 with textured PEI steel sheet
  2. Tool and accessory box
  3. 4× Toolhead with hotend
  4. 4× SnapSpeed PLA filament
  5. 4× Filament holder
  6. Safety guidelines
  7. Quick start guide
  8. 2× Filament feeder
  9. Waste collector
  10. 4× Toolhead cable
  11. AC power cable

Frequently asked questions

Do I need the Top Cover for ABS or ASA?

Yes. The Top Cover is an optional accessory sold separately. It is required for PET, ABS, ASA, PA and PC. PLA, PETG, TPU, PVA and PCTG print without it.

Can I print carbon-fiber or glass-fiber filaments?

Yes, with the Top Cover and a hardened steel nozzle. The included 0.4 mm nozzles are stainless steel.

How many colors or materials can I print at once?

Up to four, each in its own toolhead. When two toolheads hold the same filament, Backup Mode switches to the second one when a spool runs out.

Does multicolor printing produce any waste?

Only a small amount: from nozzle clearing before the print, the prime tower and flow calibration. There is no purging for every color change.

Which software does U1 support?

Snapmaker Orca for Windows, macOS and Linux, OrcaSlicer and the Snapmaker App for Android and iOS. The firmware is based on Klipper.

How does U1 connect?

Over 2.4 GHz Wi-Fi (IEEE 802.11 b/g/n) or from a USB flash drive.

Notes on the data

  1. All U1 figures are based on Snapmaker Lab tests and are for reference only. Actual results may vary.
  2. Up to 85% less waste compared with printers that switch filament through a shared nozzle. Usage varies with model size, color layout and print settings.
  3. Total waste includes supports, the prime tower and minor waste from pre-print nozzle clearing and flow calibration (U1), or purge waste (shared-nozzle printer).
  4. The 0.04 mm offset accuracy was measured with clean nozzles.
  5. The 32 mm³/s max flow applies to Snapmaker ABS at 280 °C.
  6. The Top Cover is an optional accessory sold separately. Carbon-fiber and glass-fiber filaments require a hardened steel nozzle.
  7. Sample models: Castle Tower by @Fulv, 4-color Dragon Figure by @IK3Digital, Modular East-West Bag by @variableseams, Complex Bridge by @BoSeong Hwang, Hexagon Vase, Royal Court Figurines, Perforated Clogs and Exploration Vehicle by Snapmaker. Creator projects are for illustration only.
Snapmaker U1 is a next-gen multi-color 3D printer with CoreXY architecture and four independent heads. Thanks to the SnapSwap system, it handles fast color/material switching within seconds and significantly reduces purge waste, so you print faster and more efficiently. Key processes such as bed leveling, vibration and flow compensation, and head alignment are performed automatically.

Why choose it

  • 4 tool heads work as one – automatic alignment with a deviation below 0.04 mm for sharp details without vertical shifts.
  • CoreXY + high speeds: up to 300 mm/s printing, 500 mm/s travel, acceleration 20,000 mm/s² – ideal for productive prototyping and color models.
  • Less waste during multicolor printing thanks to smart head switching; filament savings compared to classic single-head systems.
  • Built-in chamber camera for time-lapse and print monitoring; "spaghetti" or obstacle detection on the bed will be activated by an OTA update planned for December 2025.

Materials and environment

Basic compatibility: PLA, PETG, TPU, PVA. With the optional closed enclosure, PET, ABS, ASA are added. For technical materials (PC, PA, PA-CF/PA-GF), an enclosure and hardened steel nozzle are recommended. Support for 1.75 mm filaments including third parties; RFID identification works with official Snapmaker materials.

Automation and reliability

  • Auto mesh bed leveling for a flawless first layer.
  • Input Shaping and Pressure Advance for smooth surfaces and precise flow even at high speeds.
  • Automatic material system: 4 spools in standby, auto-feed, backup mode (automatic switch to the next identical material), RFID.
  • Sensors: filament runout detection, “air printing”, build plate and obstacle detection, power loss recovery.

Software and connectivity

The printer runs on Klipper firmware and uses Snapmaker Orca (based on OrcaSlicer) with factory profiles. You can start and monitor prints via Wi-Fi in the Snapmaker App; a 3.5" touchscreen is also available for quick control. Supported OS: Windows, macOS, Linux; mobile app for Android and iOS.

Key technical data

  • Build volume: 270 × 270 × 270 mm
  • 4× tool head, max. hotend flow 32 mm³/s, nozzle 0.4 mm (stainless steel), up to 300 °C
  • PEI bed, up to 100 °C
  • Travel speed up to 500 mm/s, acceleration 20,000 mm/s²
  • 3.5" touchscreen (320 × 480), built-in chamber camera
  • 8 GB eMMC, data transfer via Wi-Fi and USB
  • Machine dimensions 584 × 499 × 730 mm, weight 18.2 kg
Note: "Spaghetti" and obstacle detection functions will be made available via an OTA update planned for December 2025.

Key features:

  • Up to 4 colors/materials in one print thanks to the SnapSwap tool changer (switching in approx. 5 s).
  • CoreXY mechanics and high speeds: 300 mm/s print, 500 mm/s travel, 20,000 mm/s² acceleration.
  • Less waste during multicolor printing – smart head switching significantly reduces purge.
  • Automatic head alignment (<0.04 mm), input shaping and pressure advance for clean surfaces.
  • Auto mesh bed leveling and reliable first layer without manual adjustment.
  • Built-in chamber camera for supervision and time-lapse; smart detection via OTA update (12/2025).
  • Automatic material system for 4 spools: auto-feed, RFID, Backup Mode.
  • Build volume 270 × 270 × 270 mm for practical models and prototypes.
  • Klipper firmware + Snapmaker Orca (OrcaSlicer) with factory profiles, remote management via mobile app.
  • Wide material support; with enclosure and hardened nozzle also technical plastics and composites.
  [embed]https://youtu.be/mV3trDehYtc[/embed]

Vlastnosti

Printing technologyFDM (Fused Deposition Modeling)
ConstructionCoreXY
Number of print heads4 (SnapSwap system)
Build volume270 × 270 × 270 mm
Max. printing speedup to 300 mm/s per head
Max. travel speedup to 500 mm/s
Max. acceleration20,000 mm/s²
Max. hotend flow rate32 mm³/s
Nozzle0.4 mm, stainless steel (other variants in development)
Max. nozzle temperature300 °C
Print bedPEI, max. 100 °C
Filament diameter1.75 mm
Part coolingmain + auxiliary fan
Calibrationautomatic mesh bed leveling; automatic head offset compensation; input shaping; pressure advance
Sensors and protectionfilament runout detection; "air printing" detection; power loss recovery; bed presence/obstacle detection; head change error detection
Camerabuilt-in chamber (time-lapse; spaghetti/obstacle detection via OTA update in 12/2025)
Material systemautomatic feeding; 4 spool positions; RFID for official filaments; Backup Mode
Display3.5" touchscreen, 320 × 480 px
Storage8 GB eMMC
ConnectivityWi-Fi, USB flash drive
SoftwareSnapmaker Orca, OrcaSlicer; Snapmaker App
FirmwareKlipper
Supported OSWindows, macOS, Linux; mobile application for Android/iOS
Compatible materials (basic)PLA, PETG, TPU, PVA
Materials with optional enclosurePET, ABS, ASA
Materials with enclosure + hardened nozzlePC, PA, PA-CF, PA-GF
Dimensions584 × 499 × 730 mm
Weight18.2 kg

Printer specifications

Printer TypeFDM Open
ConstructionCoreXY
Extruder Count4
Build area270 × 270 × 270 mm
Max. bed temperature100°C
Max. nozzle temperature300°C
Heated chamberNo
Max. chamber temperatureNone
Max. speed300 mm/s
Max. acceleration20000 mm/s²
Multi-color printingYes
CameraYes
Skill LevelIntermediate