BIQU CryoGrip Pro Frostbite buildplate for Snapmaker U1

BIQU CryoGrip Pro Frostbite for Snapmaker U1

The double‑sided professional print bed BIQU CryoGrip Pro Frostbite is specially designed for Snapmaker U1 (270×270 mm). The rougher Frostbite (Coarse Textures) surface provides exceptional adhesion even for large models prone to warping, and this at significantly lower bed temperatures than are typical for classic PEI sheets.

Main advantages for Snapmaker U1 users

• Perfect adhesion for large and challenging parts The rough Frostbite texture creates a microstructure that increases adhesion of standard and technical filaments.
• Low‑temperature and energy‑saving printing The CryoGrip Pro construction allows printing with a lower heated bed temperature, which reduces energy consumption and shortens heat‑up time to operating temperature.
• Double‑sided use and 7‑layer construction The bed consists of a 7‑layer composite with highly magnetic spring steel, which ensures:
  • very good hold on the base magnetic plate,
  • even heat distribution,
  • long service life and resistance to deformation.
• Easy removal of prints After cooling, the bed can be slightly flexed and the prints will usually release by themselves – without the need to use a scraper, glue or other adhesives.
• Precise compatibility with Snapmaker U1 The 270 × 270 mm size is directly matched to the build area of the Snapmaker U1, so no modifications or trimming are required.

Recommended use

BIQU CryoGrip Pro Frostbite for Snapmaker U1 is ideal for:

• PLA and PLA blends with a high risk of warping,
• PETG, ABS/ASA (in an enclosed chamber),
• mechanical and functional parts that require strong bed adhesion,
• printing large flat objects, covers, panels, and long profiles.

For very aggressive materials and high temperatures, we recommend monitoring surface wear and, if necessary, lowering the first layer temperature or using a release layer (e.g. a thin layer of glue) to protect the texture.

Maintenance and care

• Before printing, wash the bed with lukewarm water and mild detergent, then rinse thoroughly and dry with a soft cloth.
• Avoid rough sponges and abrasive cleaners that could damage the textured surface.
• Do not use high concentrations of solvents (acetone, etc.) that can degrade the coating.

Key features

• Special Frostbite (coarse texture) surface for strong adhesion
• Double‑sided printing surface
• 7‑layer composite construction with spring steel
• Highly magnetic – holds securely on the base magnetic plate
• Optimized for low‑temperature, energy‑efficient printing
• Size 270 × 270 mm for Snapmaker U1
• Suitable for a wide range of filaments (PLA, PETG, ABS/ASA and more)

Technical parameters

Key features:

• Special Frostbite surface with coarse texture for maximum print adhesion
• Optimized for low‑temperature printing and energy savings compared to classic PEI plates
• Double‑sided 7‑layer composite construction with spring steel for long service life
• Strong magnetic adhesion to the Snapmaker U1 base magnetic plate
• Precise 270 × 270 mm dimensions for trouble‑free installation on Snapmaker U1
• Easy removal of prints after cooling thanks to the spring steel and textured surface
• Suitable for PLA, PETG, ABS/ASA and other commonly used materials in FDM printing