Bambu Lab PETG HF Lime Green 1 kg

Bambu Lab PETG HF Lime Green is a premium PETG filament designed specifically for high-speed 3D printing. In combination with modern FDM printers (especially Bambu Lab X1, P1, A1, A1 mini etc.), it allows printing at up to double the speed compared to regular PETG, without sacrificing surface quality.

The matte lime green shade gives models a modern look, hides minor imperfections, and eliminates the typical "gloss" of classic PETG during speed changes.

Main advantages

• Optimized for high flow (High Flow) – stable extrusion even at high printing speeds.
• Distinctive Lime Green color – ideal for decorative parts, highlighting elements, or safety markings.
• Matte, smooth surface – masks layers and irregularities better than glossy PETG.
• Higher toughness than PLA – suitable for functional and mechanically stressed parts.
• Good chemical and weather resistance – also suitable for outdoor use.
• Low shrinkage, minimal deformation – reliable printing of larger models.
• Excellent layer adhesion – strong, compact prints.
• Compatible with AMS / AMS Lite / AMS 2 Pro – seamless multi-color and fully automated printing.

Note: PETG HF is sensitive to moisture and for best results needs to be dried before printing.

Recommended use

• Functional parts and mechanical components
• Electronics housings, distribution boxes, cable holders
• Fasteners, clips, jigs, and assembly aids
• Outdoor signage, garden accessories, parts exposed to moisture
• Design and decorative models in distinctive lime green

Printing recommendations (approximate)

Specific profiles are available in Bambu Studio / OrcaSlicer, below is the general range for PETG HF:

• Nozzle temperature: approx. 230–260 °C (use the preset PETG HF profile for your printer)
• Bed temperature: typically 70–80 °C
• Printing speed: significantly higher than standard PETG – we recommend using the "Bambu PETG HF" profile
• Fan: medium to lower flow depending on part geometry
• Filament drying: approx. 60–65 °C for 6–8 hours (depending on dryer/oven)

For printing on Bambu Lab printers, simply select the official "Bambu PETG HF" profile, which already contains optimized parameters for high-speed printing.

Material properties

• Material: PETG (polyethylene terephthalate glycol, modified for high flow)
• Type: high-flow PETG for high speeds
• Surface: matte
• Color: Lime Green
• Filament diameter: 1,75 mm (tolerance approximately ±0,03 mm)
• Net filament weight: 1 kg
• Recommended use: functional parts, outdoor applications, visually attractive models

Advantages over regular PETG

• Significantly better behavior at high speeds (less stringing and "bubbles").
• Improved flow stability of the filament during fast acceleration changes.
• Matte surface helps hide any remaining "stringing" and ensures a uniform appearance.
• Reduced susceptibility to nozzle clogging when properly dried.

Tips for successful printing

• Always keep the filament dry (sealable box with silica gel or active dryer).
• For prints with a large contact area, use a brim or raft to reduce the risk of corners peeling.
• When switching from other PETG filaments, use cleaning filament or perform a longer "purge".
• If stringing occurs, first check the dryness of the filament, then fine-tune retractions.

Summary

Bambu Lab PETG HF Lime Green is an ideal choice for users who want to combine fast printing, high mechanical resistance, and an attractive color. In combination with Bambu Lab preset profiles, you get a reliable and fast material for everyday functional and design prints.

Key features:

• High-flow PETG filament optimized for high-speed printing.
• Distinctive lime green color with a matte surface for an attractive model appearance.
• Higher toughness and durability than PLA – suitable for functional and mechanically stressed parts.
• Low shrinkage and minimal deformation, ideal for larger models.
• Excellent layer adhesion and reliable printing even at higher speeds.
• Good chemical resistance and suitability for outdoor use.
• Compatible with Bambu Lab AMS / AMS Lite / AMS 2 Pro for fully automated printing.
• Sensitive to moisture – provides exceptionally clean and consistent prints after drying.