Professional Lab PETG Ocean Blue 1 kg

Prof. Lab PETG Ocean Blue 1 kg

Prof. Lab PETG Ocean Blue is a high-quality PETG filament in a rich ocean blue color, designed for reliable 3D printing of functional and visually attractive models. PETG combines the strength and toughness of ABS with the printing ease similar to PLA, making it suitable for both advanced users and ambitious beginners.

PETG Material Properties

• High mechanical strength and toughness – prints withstand impact and stress in tension or bending well.
• Better heat resistance than PLA – suitable for parts exposed to temperatures around 70–80 °C.
• Very good chemical resistance – resists oils, operating fluids and a range of common chemicals.
• Low shrinkage and good dimensional stability – suitable even for larger models where there is a risk of warping with ABS.
• Good layer adhesion – strong bonds between layers increase the overall life of the parts.

Color and Surface

• Ocean Blue – a striking, deep blue color reminiscent of the sea surface.
• Glossy surface – prints look representative, suitable for visible and design parts.
• The color is ideal for technical parts, electronics covers, RC models, decorations or prototypes that should also look good.

Recommended Use

Prof. Lab PETG Ocean Blue is suitable for:

• Functional holders, grips, fixtures, covers and housings
• Technical and industrial components that require strength and a certain flexibility
• Outdoor elements and accessories where higher heat resistance than PLA is needed
• Design models, decorations and prototypes in attractive ocean blue

Recommended Print Settings

(Exact values may vary slightly depending on printer and conditions – take them as initial recommendations.)

• Filament diameter: 1.75 mm
• Nozzle temperature: approx. 230–250 °C
• Bed temperature: approx. 75–90 °C
• Print bed: PEI, glass or textured sheet – recommended to use a separation layer (glue, 3Dlac) to prevent too strong adhesion
• Print speed: approx. 40–70 mm/s according to printer capabilities
• Cooling: medium (approx. 40–70 %), turn on after the first layers

PETG is more sensitive to moisture – storage in dry conditions is recommended (sealable boxes, silica gel) and in case of longer exposure to air humidity, occasional drying of the filament.

Compatibility

• Suitable for most common FDM/FFF 3D printers with a 1.75 mm nozzle.
• Can be printed on both open and closed printers; a closed chamber is not necessary.

Summary of Benefits for Users

• Universal technical filament suitable for a wide range of functional and structural parts.
• Ocean Blue color gives prints an attractive look without the need for further surface treatment.
• Balanced ratio of strength, flexibility and printing friendliness – an ideal choice if PLA is not resistant enough and ABS is too demanding for printing.

Prof. Lab PETG Ocean Blue is a great choice for anyone looking for a reliable PETG filament in a modern blue color for everyday functional and aesthetic 3D prints.

Key Properties:

• High-quality PETG filament in an attractive ocean blue color
• High strength and toughness – suitable for functional technical parts
• Better heat resistance than PLA, usable for parts around 70–80 °C
• Very good chemical resistance to oils and common operating fluids
• Low shrinkage and good dimensional stability for larger prints
• Glossy, representative surface suitable for design and visible parts
• Good layer adhesion and reliable printing on most FDM/FFF printers
• Universal use – from covers and holders to decorations and prototypes