Spedizione gratuita da 1 999 Kč
Con questa stampante riceverai una settimana di supporto chat premium per stampa 3D completamente gratis. La nostra chat ti aiuterà con configurazione, prime stampe e risoluzione problemi.
Elaboriamo e spediamo gli ordini immediatamente durante i giorni lavorativi.
Bambu Lab H2S
H2S offers the largest build volume of any Bambu Lab printer, a 350 °C hotend and a 65 °C actively heated chamber. Add the laser and cutting modules to cut, engrave and draw as well.
AI detection
340×320×340
< 50 μm
20,000×/s
Up to 30%
10W 455 nm
65 °C
Auto venting
Even a precisely calibrated printer faces mechanical wear and variance over time. With the Vision Encoder, H2S reaches distance-independent motion accuracy under 50 μm and compensates mechanical drift automatically during calibration.
Auto Hole/Contour Compensation minimizes tolerances and keeps hole dimensions at machine-shop precision. Fit shafts, bearings and fasteners without trial and error.
The extruder servo motor and high-resolution eddy current sensors at the nozzle measure nozzle pressure and calibrate PA parameters for each filament, for smoother surfaces and sharper edges.
Active Vibration Compensation neutralizes micro-vibrations and resonance in real time, keeping print quality high at higher speeds.
350 °C hotend | 65 °C heated chamber
H2S supports the entire Bambu filament lineup, from PLA and PETG to PC and PPA. Closed-loop fan control and precise thermal management reduce warping and deformation while improving layer adhesion. Build large, strong functional parts.
With 340×320×340 mm³ of build volume, H2S offers the largest print space of all Bambu Lab printers. Print large models in one piece.
Compared with the X1 Carbon.
Bigger parts on fewer plates.
The DynaSense PMSM servo extruder delivers up to 10 kg of extrusion force, 67% more than regular stepper motors, for solid high-flow printing. With up to 1000 mm/s toolhead speed and 20,000 mm/s² acceleration, it cuts print time by up to 30% while keeping top quality.
Side table
1 day 7 hours
12.3 % faster than X1C
Truck model
1 day 1 hour
11.2 % faster than X1C
The Grand Budapest Hotel
6 days
22.2 % faster than X1C
20,000 checks per second
The Bambu Lab PMSM servo system samples resistance and position at 20 kHz and continuously modulates electromagnetic torque. It stabilizes extrusion and detects filament grinding or clogs in real time.
23 sensors and 3 cameras
H2S monitors everything from filament feeding to chamber temperature. Before each job, its camera also checks the build plate for debris and identifies the plate type.
Flap-switch airflow and filtration
A switching flap sets the airflow for whatever you are working on.
The chamber is sealed and air recirculates through the filter and heater. Print large engineering parts without warping.
The top vent brings in cool air while exhaust air can pass through the filter. Print PLA and PETG with the door closed and handle overhangs and bridges with ease.
The top vent and filter flap open and fumes go straight to the ventilation. Your workspace stays clean and safe.
Compact. Capable. All in one.
With the laser and cutting modules, H2S becomes a multi-purpose workshop. Laser and digital cutting jobs are prepared and controlled in Bambu Suite.
This configuration does not include the laser. The laser and cutting modules come with the H2S Laser Full Combo, and an H2S without a laser can be upgraded with the Laser Upgrade Kit.
The top-down BirdsEye camera and toolhead camera preview the toolpath directly on your material with 0.3 mm accuracy. What you see is what you get.
Bambu Suite arranges your project shapes to make the most of every sheet.
Cuts cleanly through plywood, acrylic or PU up to 5 mm thick.
An air stream blows away smoke and char while cooling the surface, keeping lines sharp and clean.
Cuts paper, vinyl, PU leatherette and more, clean and ready to apply.
The pen module automates linework, sketches and handwritten notes. Precise, repeatable and hands-free.
Safety is built into the design.
The sensors continuously monitor for fire risks. If an issue is detected, a loud buzzer and a phone alert notify you immediately.
Built from fire-resistant materials, the chamber adds passive protection.
Swap nozzles in seconds without tools. Switching to a high-flow hotend or another nozzle size is easy even for first-time users.
Active motor noise cancelling and quieter air ducts keep noise below 50 dB. Print overnight or in shared spaces.
The die-cast aluminum alloy chassis is a rigid foundation for fast large-format printing and minimizes accuracy loss from micro-twisting.
H2S works with AMS 2 Pro and AMS HT. Up to 4 AMS 2 Pro and 8 AMS HT units provide 24 slots for printing with up to 24 colors. During drying, the spools rotate automatically for even results.
AMS 2 Pro is included in this configuration.
Multi-color printing from 4 slots with filament drying.
Drying and feeding for a single spool.
Automatic venting removes moisture during drying, then seals the unit airtight for weeks of quality printing.
AMS 2 Pro reads the RFID tag to match drying settings for official Bambu filaments automatically.
Bambu Lab H2S
Textured PEI build plate
Spool holder
Accessory box
AMS 2 Pro
Yes, H2S supports the 10W laser and the cutting module. It does not support the 40W laser.
Yes, with the Laser Upgrade Kit. The kit uses an external air pump connected to the printer by an air tube. After the upgrade, the printer has the same functions and performance as the laser version.
No. Choose the model that fits your needs when ordering.
The first-generation AMS works with H2S for multi-color printing out of the box but does not support drying. AMS lite is not supported because of its different feeding mechanism and buffer.
Up to 4 AMS 2 Pro and 8 AMS HT units, 12 units with 24 slots in total, for printing with up to 24 colors.
They are compatible with H2D. The A1 hotend is similar but not fully compatible and is not recommended on H2 series printers. An H2 hotend can be used on A1 with the H2 series silicone sock.
Yes. The H2D calibration plate for motion accuracy calibration is compatible too.
No. You can still start prints because the printer has built-in storage. Without a USB drive, recording and time-lapse, starting prints over LAN, sending files from Bambu Studio for storage and log export are unavailable. The drive must support USB 2.0 or later with write speeds above 10 MB/s, formatted as FAT32 or exFAT.
The laser uses a high-energy beam that can ignite flammable materials. Never leave the machine unattended during laser work, keep flammable and explosive items away and follow the Bambu Lab laser safety guidelines.
