Product description

ERYONE PLA Silk Metallic Frenzy is a four-color filament with a pronounced silky gloss and an eye-catching color pattern. The combination of shades black, dark red, banana orange, and gold gives prints a premium “metallic” look without painting.

Why choose this filament

• Silky gloss and saturated colors for representative models and decorations.
• High-speed printing up to 500 mm/s without loss of detail.
• Stable diameter ±0.03 mm for consistent material flow and reliability.
• Increased Z-direction strength (approx. 20 MPa) with the optimized Silk formulation.
• Wide compatibility with the vast majority of FDM/FFF printers.

Recommended print settings

• Nozzle: 190–220 °C
• Bed: 55–70 °C
• Speed: 30–500 mm/s
• Pre-print drying (optional): 65–75 °C for 12 h
• Build surface: glass, PEI, spring steel sheet

Tip: Lower speed and higher temperature will enhance surface gloss; for sharper details, reduce temperature and use stronger cooling.

Use cases

• Decorations and interior accessories
• Vase and “mode” profiles, figurines, statues
• Cosplay and prop replicas
• Luxurious-looking gifts, signs, logos

Compatibility notes

• Suitable for standard hotends with brass or hardened nozzles.
• Can be printed in open or enclosed printers; good part cooling is recommended.

Key features:

• Four premium colors in one filament for an attractive color effect
• Highly glossy “silk” surface without the need for painting
• Stable tolerance ±0.03 mm for consistent results
• Printing up to 500 mm/s for fast model production
• Optimized first-layer adhesion on glass and PEI
• Wide compatibility with most FDM printers