ERYONE ABS GF white 1kg – industrial‑strength ABS with glass fiber

ERYONE ABS GF is a composite ABS filament with 10 % glass fibers, designed for functional, mechanically stressed parts. Combined with low shrinkage and high dimensional stability, it is suitable for precise technical prints even on printers with an open build space.

The white variant is ideal wherever you need a clean, technical look, good visibility of details, and easy surface finishing (sanding, painting, dyeing).

---

Main advantages

• 10 % glass fibers (GF) – significantly higher stiffness and strength compared to standard ABS
• High thermal and chemical resistance – suitable for parts near engines, machines, or chemically stressed components
• Minimal warping and shrinkage – stable printing even for larger models
• Matte, slightly sandblasted surface – professional appearance, lower layer visibility
• Low odor compared to standard ABS – modified formulation with reduced VOC
• Accurate diameter and stable flow – high dimensional accuracy of prints and reliability during long prints

Warning: Materials filled with glass fibers are abrasive – for long‑term printing, use a hardened steel or other wear‑resistant nozzle, ideally diameter ≥ 0,4–0,6 mm.

---

Recommended use

This filament is especially suitable for functional and structural parts where the following are required:

• high stiffness and strength
• heat resistance (operating environments with elevated temperature)
• good chemical resistance (oils, some solvents, automotive environment)

Typical applications:

• brackets, jigs, clamps, templates
• enclosures and technical boxes for electronics or machinery
• functional prototypes and parts for assembly or load testing
• parts in automotive, workshop, and industry that require higher durability and dimensional stability

---

Printing recommendations

For best results, it is recommended to use:

• Nozzle temperature: 240–280 °C
• Bed temperature: 80–100 °C
• Print speed: 30–150 mm/s (start rather slower, for example 40–60 mm/s)
• Build surface: glass with a suitable adhesive, PEI, textured sheet, or a special surface for ABS/composites
• Chamber: an enclosed chamber is beneficial (better layer adhesion), but the material is designed to reduce warping even in an open build chamber
• Cooling: low or off; a higher fan flow may worsen interlayer adhesion

Before printing, we recommend:

• drying the filament (e.g. 3–4 hours at 60–70 °C) for maximum surface quality and strength
• checking the condition of the nozzle – glass‑fiber‑filled materials can wear out brass nozzles more quickly

---

Material properties

• Base polymer: ABS (acrylonitrile‑butadiene‑styrene)
• Filler: approx. 10 % glass fibers
• Characteristics: high stiffness, good impact resistance, heat resistance, reduced warping
• Print surface: matte, slightly textured, very suitable for technical parts
• Color: white

---

Technical specifications

Parameter	Value
Material	ABS with glass fibers (ABS GF, ~10 % GF)
Filament weight	1 kg of pure filament
Filament diameter	1,75 mm (factory tolerance ±0,03 mm)
Recommended nozzle temperature	240–280 °C
Recommended bed temperature	80–100 °C
Recommended print speed	30–150 mm/s
Print surface	matte, lightly “sandblasted”
Recommended nozzle	hardened steel / wear‑resistant, ≥0,4–0,6 mm
Odor / emissions	reduced odor compared to standard ABS
Suitable use	functional and structural parts, jigs, covers, technical components
Pure color	white

---

Who ERYONE ABS GF is suitable for

• Makers, hobby designers, and DIY enthusiasts who already have experience with ABS or technical materials
• Service centers, workshops, laboratories, and small production where it is necessary to print durable and accurate parts
• Users looking for a stronger alternative to standard ABS but who do not want to switch to even more demanding materials (PA, PC, etc.)

If you need a reliable technical filament for durable components, ERYONE ABS GF white 1kg is an excellent choice for your next project.

Key features:

• ABS composite with glass fibers (approx. 10 % GF) for high stiffness and strength
• Minimized warping and shrinkage for stable printing of larger parts
• High thermal and chemical resistance for demanding technical applications
• Matte, finely textured surface for a professional look of prints
• Accurate filament diameter with low tolerance for dimensionally precise parts
• Low odor compared to classic ABS thanks to a modified formulation
• Suitable for functional prototypes, jigs, brackets, and covers in workshops and industry