Free shipping from 1 999 Kč
Fast shipping
Verified store
Thousands of customers
Free shipping from 1 999 Kč
Bambu Lab PLA-CF in black is a carbon fiber reinforced filament that offers increased stiffness and strength compared to standard PLA. It’s ideal for beginners, easy to print, and compatible with AMS for high-speed printing. Prints have a matte finish with minimal layer lines, making it great for engineering parts as well as models with high aesthetic requirements. Suitable for bike frames, mounts, and toys.
Bambu PLA-CF is a carbon fiber reinforced PLA with improved stiffness and strength. PLA-CF is easy to print and suitable for beginners like regular PLA. It’s AMS-compatible with a low risk of clogging during high-speed printing. Prints have a matte finish with nearly invisible layer lines, making them suitable for general engineering parts or models requiring better appearance, such as bike frames, mounts, and toys.
The addition of carbon fibers gives prints a unique matte surface and effectively hides layer lines, providing a smooth, premium look.
Bambu PLA-CF can be paired with any filament from the PLA series to make your prints more colorful and achieve different texture requirements.
Bambu PLA-CF exceeds the mechanical properties of PLA Matte in XY flexural strength, Z flexural strength, XY flexural modulus, Z flexural modulus, XY impact strength, and Z impact strength by 20% and 115%, making it more suitable for printing models with higher strength requirements.
Bambu PLA-CF has low shrinkage and warping to achieve perfect fit accuracy between printed parts.
Bambu PLA-CF is designed to be support-friendly. It can be removed more easily compared to regular PLA while still maintaining a smooth support interface.
Bambu PLA-CF is as easy to print as regular PLA. It can print smoothly and consistently at high speed without clogging.
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setup steps.
• Drying PLA-CF is optional, but drying before use is recommended. Suggested drying conditions are 55 ℃ for 8 hours in a convection dryer or 75 ℃ for 12 hours on the printer’s heated chamber. For more details, see the filament drying enclosure on the wiki.
