• Up to 600 mm/s and acceleration of 20 000 mm/s² for fast and precise printing, with a maximum hotend flow rate of 40 mm³/s. Build volume of 256×256×256 mm in an enclosed chamber.
• New 5" touchscreen and redesigned 2nd-generation interface – controlling the printer is as intuitive as using a smartphone.
• AI error detection (spaghetti, nozzle clogging, start check) thanks to the integrated camera and 2 TOPS NPU – more peace of mind during long prints.
• Adaptive Airflow System: cool air intake mode for PLA/PETG and heat-retention mode with an activated carbon filter for demanding materials; chamber temperature up to 50 °C.
• Ready for industrial materials: hardened steel gears and nozzle, quick-change “1-clip” hotend in ~30 seconds.
• Multi-material and multicolor printing with AMS or AMS 2 Pro – up to 24 colors when chaining units.

What Bambu’s 2nd-generation technologies offer

• PMSM servo extruder with up to 8.5 kg of extrusion force and 20kHz feedback – stable feeding even at high flow rates.
• Auto Flow Dynamics Calibration: eddy current pressure sensor and active flow compensation for clean edges and smooth transitions.
• Closed-loop control of all fans (part/hotend/aux) for consistent cooling.
• “Stage” LED lighting and a lag-free 1080p camera preview – perfect timelapses and remote monitoring.

Stability and maintenance

• The new P2S kinematics use smooth steel rods and belts (X/Y) instead of carbon rods – easier cleaning and servicing.
• Active VOC and particulate filtration through a carbon filter; door sensor and power-loss recovery.

Materials and build plates

• Supported materials: PLA, PETG, ABS, ASA, TPU, PA, PC, PVA, and reinforced composites (PLA‑CF, PETG‑CF, PA6‑GF/CF, PAHT‑CF, PPA‑CF, etc.). A textured PEI plate is included; smooth PEI and Cool Plate SuperTack are also supported.

Connectivity and software

• Dual‑Band Wi‑Fi (2.4/5 GHz), Bambu Studio + support for G-code from third-party slicers (features may be limited).

Who it is suitable for

• Print farms and small businesses that want to maximize throughput without compromising quality.
• Demanding hobby makers who appreciate multi-material printing and smart error monitoring.
• Schools and workshops where safety, process stability, and ease of operation are essential.

Key features:

• Up to 600 mm/s, 20 000 mm/s², and 40 mm³/s – high speed without loss of quality.
• 5" touchscreen and new UI for quick setup and operation.
• AI error detection with start check, spaghetti monitoring, and nozzle clog detection.
• Adaptive Airflow System: cleaner air and stable chamber temperature (up to ~50 °C).
• PMSM servo extruder with steel gears and a hardened nozzle for a long service life.
• Quick-change “1-clip” hotend – nozzle replacement in tens of seconds.
• 1080p camera with LED “stage” lighting for a sharp preview and timelapses.
• Compatibility with AMS/AMS 2 Pro for convenient multicolor and multi-material printing.
• Closed-loop fan control for consistent cooling and quality.
• Flexible PEI build plates (textured plate included) for reliable adhesion.[embed]https://youtu.be/nzXyCdBnlRs[/embed]