Free shipping from €82.00

Premium design filament Prusament PVB Natural Transparent 500g with NFC chip
Prusament PVB is a special translucent design material based on polyvinyl butyral, ideal for visual and decorative models – vases, jewelry, lampshades, props, or non-load-bearing parts. It excels in easy smoothing with isopropyl alcohol (IPA), through which a glass-like appearance can be achieved. It prints excellently (settings similar to PLA), has low shrinkage and good layer adhesion, which facilitates printing larger models without deformation. The NFC chip in the spool allows for quick material identification and storage of filament data for compatible systems.
Prusament PVB Natural Transparent is a premium filament produced by Prusa Research, made from polyvinyl butyral (PVB). It is a specialized design material suitable primarily for visually attractive prints with the possibility of chemical smoothing in isopropyl alcohol (IPA), thanks to which you can easily achieve a glassy, almost "glass-like" appearance.
We recommend using Prusament PVB Natural if:
On the contrary, it is not suitable for:
| Parameter | Value* |
|---|---|
| Nozzle temperature | 215 °C ± 10 °C |
| Bed temperature | approx. 75 °C |
| Recommended surface | Smooth / satin PEI |
| Filament diameter | 1.75 mm ± 0.03 mm |
*Specific settings may vary by printer, nozzle, and slicer profile.
Tips for PVB printing and smoothing:
Prusament is Prusa Research's own brand of filaments. Each PVB spool is manufactured and inspected in-house, with diameter measurement and mechanical property verification. This gives you:
Thanks to NFC and the OpenPrintTag standard, the spool can be easily identified by compatible devices or applications to work with stored filament data.
| Barva | Průhledná |
| Hmotnost bez obalu | 0.5 kg |
| Manufacturer | Prusa Research / Prusament |
| Material | PVB (polyvinyl butyral) |
| Color | Natural Transparent (translucent, natural) |
| Filament weight | 500 g |
| Filament diameter | 1.75 mm ± 0.03 mm |
| Recommended nozzle temperature | 215 °C ± 10 °C |
| Recommended bed temperature | approx. 75 °C |
| Recommended bed surface | smooth or satin PEI sheet |
| Material character | design, translucent, suitable for chemical IPA smoothing |
| Heat resistance | approx. up to 60 °C (similar to PLA) |
| Diameter tolerance | ±0.03 mm |
| Properties | low shrinkage, good bed adhesion, possibility of chemical IPA smoothing |
| NFC | yes, spool with NFC chip (OpenPrintTag compatible) |