Filamentree PETG Orange 1 kg

Filamentree PETG Orange 1kg

Filamentree PETG Orange is a high-quality PETG filament suitable for most FDM 3D printers. Thanks to the combination of high strength, toughness, and relatively easy print setup, it is ideal for functional components, prototypes, holders, covers, and aesthetic models in a rich orange color.

Main advantages of PETG Filamentree

• High strength and toughness – more durable than PLA, suitable for mechanically stressed parts.
• Good thermal resistance – PETG parts can withstand higher temperatures than PLA.
• Easier to print than ABS – less tendency to warp, an enclosed chamber is not necessarily required.
• Excellent layer adhesion – strong and compact prints.
• Orange color – ideal for safety and technical parts that must be clearly visible.
• Standard diameter – suitable for most desktop FDM printers.

Recommended printing parameters

Specific settings may vary depending on the printer and conditions; the values below serve as a starting point:

• Nozzle temperature: approx. 230–250 °C
• Bed temperature: approx. 70–90 °C
• Printing speed: approx. 40–80 mm/s
• Fan: reduced or medium power (depending on part geometry)

Before printing, we recommend drying the filament (e.g., in a filament dryer) to minimize stringing and improve surface quality.

Applications of Filamentree PETG Orange

• functional and structural parts
• holders, clamps, fixtures
• housings, electronics covers
• prototypes of stressed components
• safety and warning elements in orange color

PETG Material Properties

• material type: PETG (polyethylene terephthalate glycol)
• good chemical resistance
• higher temperature resistance than PLA
• low odor during printing
• less brittle than PLA

Storage

To ensure the filament maintains its properties, store it:

• in a dry place, ideally in a sealed bag/box with silica gel
• away from direct sunlight
• at stable room temperature

Proper storage significantly extends filament life and ensures consistent print quality.

Key features:

• Universal PETG filament for functional and aesthetic prints
• High strength and toughness, suitable for mechanically stressed parts
• Better thermal resistance than PLA, easier printing than ABS
• Distinct orange color for highly visible technical and safety elements
• Good layer adhesion and limited warping on a properly prepared bed
• Suitable for most desktop FDM 3D printers with a diameter of 1.75 mm