ERYONE PP in white is a filament for functional prints where you will appreciate its low weight, toughness, flexibility, and chemical resistance. Standard polypropylene has a typical density of 0,95 g/cm³, and the manufacturer recommends it, for example, for handles or resealable containers.

Why choose this PP filament

• Tough and semi-rigid material with good flexibility for practical parts.
• Chemical and abrasion resistance for technical and functional prints.
• Low density of 0,95 g/cm³ helps keep printed parts lightweight.
• White variant with a diameter of 1,75 mm, a tolerance of ±0,03 mm, and a 900 g spool.

Recommended print settings

Use the manufacturer's settings as a starting point and fine-tune them according to your printer, model, and build plate.

• nozzle temperature 220-240 °C
• build plate temperature 60-80 °C
• print speed 30-100 mm/s
• enclosed print space
• glass, PEI, or spring steel build plate

What to keep in mind when printing PP

For better first-layer adhesion, the manufacturer recommends applying adhesive intended for PP to the heated build plate. If the filament has been exposed to moisture, the recommended drying time is 8 hours at 50-60 °C.

The stated parameters serve as a starting point. The result is affected by the part design, printing conditions, and the specific printer.