Name: ERYONE PLA Silk Čtyřbarevný Royal Essence (černá fialová stříbrná tmavě zelená)
Brand: ERYONE
Price: 21.689 EUR
Availability: OutOfStock

Overview

ERYONE PLA Silk Royal Essence is a four-color, co-extruded filament with an exclusive color combination: black, purple, silver, and dark green. Thanks to its silky gloss and stable composition, it provides a professional look without additional polishing. The improved recipe enables very fast printing (up to 500 mm/s) while maintaining strength and dimensional accuracy.

Why choose Royal Essence

Silky glossy surface for a luxurious look of parts
Four attractive colors in one strand for unique effects without spool changes
High compatibility with FDM printers, diameter accuracy ±0,03 mm
Improved Z-direction strength (approx. 20 MPa) and reliable layer adhesion
Ability to influence “gloss” by adjusting temperature and speed (higher temperature and slower printing = higher gloss)

Recommended print settings

Parameter	Value
Nozzle temperature	190–220 °C
Bed temperature	55–70 °C
Print speed	30–500 mm/s
Build surface	glass, PEI, flexible steel sheet
Drying before printing	65–75 °C for ~12 h

Tip: For maximum gloss, print slower and at a higher temperature within the recommended range.

Physical and mechanical properties (typical values)

Property	Typical value
Density	~1,32 g/cm³
Vicat softening (VST)	~56 °C
Glass transition temperature (Tg)	~57 °C
Heat deflection temperature (HDT)	~50 °C
Melt flow index (MFI)	~20 ± 1,5 g/10 min
Tensile strength (X–Y)	~62,7 MPa
Tensile strength (Z)	~19–20 MPa
Flexural strength	~86,7 MPa
Impact strength (Charpy)	~3,8 kJ/m²

Note: Values are for reference; results may vary depending on printer settings and part geometry.

Applications

Decorations, figurines, design prototypes, and gift items
Visible covers and elements where gloss and color effect stand out
Prints for presentations and exhibition models

Compatibility

Suitable for most FDM/FFF printers and 3D pens using 1,75 mm filament
Recommended nozzle: 0,4 mm (other sizes possible depending on model detail)

Ecology and packaging

PLA is based on renewable resources
The spool is vacuum-packed to minimize moisture

Key features:

Luxurious silky gloss without post-processing
Four colors in one strand: black, purple, silver, dark green
Improved recipe for fast printing up to 500 mm/s
High dimensional accuracy ±0,03 mm, reliable extrusion
Strong layer adhesion and Z-direction strength ~20 MPa
Ability to control gloss via temperature and print speed
High compatibility with common FDM printers
Vacuum packaging – ready to print, low moisture

ERYONE PLA Silk Four-Color Royal Essence (black purple silver dark green)