Mecha Visor
By Fang
Free shipping from €82.00
Fast shipping
Verified store
Thousands of customers
Free shipping from €82.00
We process and ship orders immediately during the business day.
Included free · Premium support for 1 week, SolidPrompt 3D editor for 1 year · See the editor
5 důvodů, proč si v roce 2026 koupit 3D tiskárnu..
Creality Ender-3 V4 Combo
A 220 × 220 × 235 mm build volume, speeds up to 500 mm/s and full-auto calibration. The Combo includes a CFS unit for printing in 4 colors.
From the community
Creations from the Creality community for inspiration: from visors and hair claws to shoe charms.
By Fang
By Zhongxiaoshou
By Freya
Design
Clean lines and a minimalist look. The Ender-3 V4 suits your desk even when it is not printing.
Make it yours
Creality offers STL files for modifying the printer. Print your own covers and give it your personal style.
Structure
The gantry frame is a seamless die-cast aluminum alloy loop. It minimizes shaking and wobble while printing.
For first-timers
Unbox, assemble and start printing in minutes. The printer runs its tests and calibrations before printing on its own - all it takes is one tap.
Full-auto calibration
The printer sets the nozzle height, levels the bed and loads filament on its own. Input shaping is calibrated automatically too.
The printer sets the optimal nozzle height above the bed for accurate printing.
The printer probes the bed and compensates for unevenness without manual adjustment.
Load and unload filament with a single tap on the screen.
Quick-swap nozzle
The toolhead cover is magnetic - just pull it off. Then fit a smaller nozzle for fine detail or a larger one for faster printing.
Quiet Mode
In Quiet Mode the Ender-3 V4 runs at just 47 dB, so it will not disturb you while you work or relax.
Several design features keep the noise down.
The axis motors are designed for quiet operation.
Balanced fans run with less vibration.
The toolhead glides along a linear rail with minimal friction.
The chassis absorbs sound from inside the printer.
Multicolor with CFS
Connect up to 4 CFS units and print with up to 16 colors and clean transitions. The Combo includes one CFS unit for 4 colors.
First layer
Every print builds on its first layer. The new one-piece heatbed heats up quickly and evenly.
Input shaping
Input shaping compensates for vibrations from toolhead movement. Surfaces come out smooth with barely visible layer lines.
Software
The Creality Cloud app offers free models and lets you start and monitor prints remotely.
A slicer with presets for over 40 filaments, multicolor 3MF slicing and control of multiple printers over LAN.
The printer system with multi-filament management, expert mode, root access and Fluidd support.
| Model | Build volume | Max. speed | Colors | Design | Camera | Printer weight |
|---|---|---|---|---|---|---|
| Creality K3 | 260 × 260 × 260 mm | 500 mm/s | 4 | Open | With AI error detection | 22 kg |
| Creality K2 Pro Combo | 300 × 300 × 300 mm | 600 mm/s | 4 (up to 16) | Enclosed with heated chamber | With AI error detection | 23.7 kg |
| Creality K2 Combo | 260 × 260 × 260 mm | 600 mm/s | 4 (up to 16) | Enclosed | With AI error detection | 18.3 kg |
| Creality Hi Combo | 260 × 260 × 300 mm | 500 mm/s | 4 (up to 16) | Open | Built-in | 9.2 kg |
| Creality Hi | 260 × 260 × 300 mm | 500 mm/s | 1 (up to 16) | Open | Built-in | 9.2 kg |
| Creality SPARKX i7 Combo | 260 × 260 × 255 mm | 500 mm/s | 4 | Open | With AI error detection | 9.12 kg |
| Creality Ender-5 Max | 400 × 400 × 400 mm | 700 mm/s | 1 | Open | Optional accessory | 25.9 kg |
| Creality Ender-3 V4 Combo This printer | 220 × 220 × 235 mm | 500 mm/s | 4 (up to 16) | Open | Built-in | 6.8 kg |
The Ender-3 V4 printer and one CFS unit with four filament slots, so you can print in 4 colors right away. For 8, 12 or 16 colors, connect additional CFS units, sold separately.
According to the manufacturer, Hyper-PLA, PLA, PETG, TPU 95A, ABS, ASA, PLA-CF and PA-CF. The CFS supports PLA, PETG, ABS, ASA, PET and PLA-CF. Flexible TPU cannot be used with the CFS - print it from the spool holder.
The manufacturer lists both ABS and ASA as supported materials. The nozzle heats up to 300 °C and the bed up to 100 °C. The printer has an open frame without an enclosure.
In Quiet Mode it runs at 47 dB, as measured by Creality Lab. Quiet motors, balanced fans, a linear rail and a sound-absorbing chassis all contribute.
Yes. The built-in camera lets you monitor prints in real time and record time-lapse videos.
Send G-code and 3MF files over Wi-Fi, through Creality Cloud or from a USB drive. Use Creality Print 6.0 or newer for slicing. The printer has a 2.8" color touchscreen and 8 GB of eMMC storage.
Creality Ender-3 V4 Combo is the new generation of the popular Ender-3 series. The Combo package includes the Ender-3 V4 printer and one CFS (Creality Filament System) unit with four slots, so you can start printing in 4 colors or materials right away. With additional CFS units (up to 4), you can print with up to 16 colors in a single model.
The specifications are based on data provided by Creality. The speed of 500 mm/s and acceleration of 12 000 mm/s² are maximum values. The 47 dB noise level in quiet mode was measured by Creality Lab.
| Printing technology | FDM, open-frame design |
| Model | Ender-3 V4 Combo (printer + 1× CFS) |
| Build volume (X × Y × Z) | 220 × 220 × 235 mm |
| Max. print speed | 500 mm/s |
| Max. acceleration | 12 000 mm/s² |
| Max. nozzle temperature | 300 °C |
| Max. bed temperature | 100 °C |
| Filament diameter | 1,75 mm |
| Print bed | flexible plate with PEI surface |
| Calibration | automatic Z-offset, bed leveling, input shaping |
| Multicolor printing | 4 colors with the included CFS, up to 16 colors with 4 CFS units |
| Supported materials | Hyper-PLA, PLA, PETG, TPU 95A, ABS, ASA, PLA-CF, PA-CF |
| Camera | built-in, print monitoring and time-lapse videos |
| Noise level | 47 dB in quiet mode |
| Display | 2,8" color touchscreen |
| Storage | 8 GB eMMC |
| Connectivity | Wi-Fi, USB drive, Creality Cloud |
| Weight | printer 6,8 kg, CFS unit 4,56 kg |
| Printer Type | FDM Open |
| Construction | Bed Slinger |
| Extruder Count | 1 |
| Build area | 220 × 220 × 235 mm |
| Max. bed temperature | 100°C |
| Max. nozzle temperature | 300°C |
| Heated chamber | No |
| Max. chamber temperature | None |
| Max. speed | 500 mm/s |
| Max. acceleration | 12000 mm/s² |
| Multi-color printing | Yes |
| Camera | Yes |
| Skill Level | Beginner |