Bambu Lab PLA Silk Multi-Color Phantom Blue 1 kg

Product Description

Bambu Lab PLA Silk Multi-Color Phantom Blue 1 kg is an exclusive dual-color PLA Silk filament that combines deep blue and black shades in one strand. Thanks to its silky, high-gloss surface, it gives your prints a premium look without the need for additional polishing or painting.

The filament is designed for Bambu Lab printers, but thanks to the standard PLA 1.75 mm diameter, it is fully usable on most common FDM 3D printers.

Key Features

• Dual-color design Phantom Blue (Blue–Black) The color is split in the cross-section of the strand, so by orienting the spool you can influence which color will dominate the model.
• Silk surface with high gloss Creates a smooth, silky effect that stands out great on smooth surfaces, curves, and decorative models.
• Easy to print like classic PLA The filament has very good layer adhesion and low shrinkage, so it is also suitable for beginners.
• AMS compatibility and RFID chip (Bambu Lab) The spool contains an RFID tag with stored print profiles for Bambu Lab printers – just insert it into the AMS and print without manual setup.
• Clean and without significant odor The PLA base ensures minimal odor and safer use in standard interiors.
• Reusable spool Supplied on a high-quality plastic spool that can be reused (e.g., with Bambu Lab refill filaments).

Recommended Use

This filament is ideal for:

• decorative and design models
• figures, statues, busts, cosplay accessories
• gifts, trophies, awards, logos and lettering
• interior decorations, vases (decorative, not waterproof)
• prototypes where appearance and gloss are important

If you are looking for a filament that instantly catches the eye, Phantom Blue is the perfect choice.

Recommended Print Settings

(default values, always adapt to your printer and profile)

• Nozzle temperature: 210–240 °C
• Bed temperature: 35–45 °C (with glue or a suitable adhesive layer)
• Recommended print speed: up to 250 mm/s (it is advisable to slow down printing for maximum gloss)
• Drying before printing: 55 °C for approx. 8 hours (recommended for best results)
• Storage: in a closed bag/box with silica gel, relative humidity < 20 %

Technical Parameters of the Material (PLA Silk Dual-Color)

Basic Information

• Material: PLA Silk Dual-Color
• Diameter: 1.75 mm ± 0.03 mm
• Net weight of filament: 1 kg
• Color type: dual-color, Phantom Blue (Blue–Black)
• Surface: silky, high-gloss

Physical Properties

• Density: approx. 1.32 g/cm³
• Vicat softening temperature: approx. 56 °C
• Heat deflection temperature (HDT, 0.45 MPa): approx. 53 °C
• Melting point: approx. 152 °C
• Melt flow index (MFI): 20.5 ± 1.2 g/10 min (210 °C / 2.16 kg)

Mechanical Properties (X-Y direction)

• Tensile strength: 27 ± 4 MPa
• Elongation at break: 3.5 ± 0.6 %
• Flexural modulus: 2370 ± 150 MPa
• Flexural strength: 66 ± 4 MPa
• Impact strength: 24.5 ± 1.7 kJ/m²

Compatibility

• Bambu Lab 3D printers (P1P, P1S, X1, X1C, A1, A1 mini…) – full compatibility including AMS and RFID.
• Other FDM/FFF printers with 1.75 mm filament diameter – requires manual profile setup (PLA Silk / slower printing, higher gloss).

Tips for Best Results

• For maximum gloss and less visible layers, reduce the printing speed compared to standard PLA.
• For decorative objects, choose more perimeters and lower infill – the surface will be optically higher quality.
• Experiment with spool orientation – by changing the filament feed direction, you can emphasize either the blue or black color component.
• Avoid using for functional parts exposed to temperatures above approx. 50 °C (e.g., in a car in the sun), PLA Silk is primarily an aesthetic material.

Key Features:

• Premium PLA Silk Dual-Color filament with dual-color effect Phantom Blue (Blue–Black)
• Silky, metallic, and high-gloss surface for luxury-looking prints
• Easy printing with PLA properties – low shrinkage and good layer adhesion
• Ideal for decorative models, figures, trophies, logos, and gift items
• Full compatibility with Bambu Lab printers, AMS system, and RFID chip in the spool
• Standard 1.75 mm diameter suitable for most FDM/FFF 3D printers
• Recommended print settings optimized for high gloss and quality surface