Product Description

Bambu Lab Cool Plate SuperTack Pro H2C (FAP041) is an improved cool build plate with a SuperTack Pro surface, designed specifically for the Bambu Lab H2C and H2C Laser 3D printers. Thanks to a special coating, it offers ultra‑strong adhesion for PLA and PETG filament even at significantly lower heatbed temperatures, which reduces energy consumption and helps limit deformation (warping) in larger prints.

The SuperTack Pro variant follows the classic SuperTack but adds:

• longer surface lifespan (less wear after hundreds of prints),
• higher scratch resistance,
• even lower recommended bed temperatures for reliable adhesion.

The build plate consists of a flexible steel sheet with a special coating, so after printing is finished, just remove the plate, bend it slightly, and most prints will release without the use of tools – without risk of damage to the model or the surface.

Warning: SuperTack Pro is optimized for PLA and PETG. It is not suitable for TPU and some very "silk" PLA materials may have extremely strong adhesion – it is recommended to test on smaller models and potentially use a different type of build plate.

Key Features

• Ultra‑strong adhesion for PLA and PETG even at low bed temperatures.
• Significantly reduces warping in larger and flat models.
• Improved SuperTack Pro surface – longer lifespan and better scratch resistance.
• Low working bed temperatures → faster heating and lower energy consumption.
• Flexible steel plate for easy removal of prints by bending.
• Smooth matte surface – aesthetically pleasing bottom side of the print.
• Works even on slightly uneven or worn surfaces – tolerant of minor imperfections.
• Original Bambu Lab accessory with precise compatibility for H2C / H2C Laser.

Technical Parameters

Note: Dimensions and weight values are based on official specifications and may vary slightly due to manufacturing tolerances.

Use and Maintenance

1. Installation of the build plate\nPlace the Cool Plate SuperTack Pro on the magnetic base of the H2C printer so that the alignment matches the original plate. Ensure there is no debris under the plate.
2. Recommended Use\n
   • Ideal for PLA and PETG.
   • For first layers, use the SuperTack Pro / Cool Plate SuperTack Pro preset in Bambu Studio for H2C.
3. Removing the Print\n
   • After printing is finished, let the plate cool down – adhesion will decrease.
   • Remove the plate from the printer and slightly bend it – most prints will release themselves.
   • Use only plastic or very gentle tools to avoid damaging the soft surface.
4. Cleaning and Care\n
   • In case of contamination, wash the plate with lukewarm water and soap, then rinse thoroughly and dry.
   • Do not use solvents (acetone, technical alcohol, etc.), which can irreversibly damage the coating.
   • Do not expose the build plate to mechanical damage – do not cut on it and do not use metal scrapers.

Who is the plate for

• Users of Bambu Lab H2C / H2C Laser who want maximum adhesion reliability when printing PLA and PETG.
• Printers who print larger, flat or more demanding models where there is a risk of warping on standard plates.
• Customers looking for original and long-term durable accessories directly from Bambu Lab.

Thanks to the combination of strong adhesion, energy efficiency, and long lifespan, the Bambu Lab Cool Plate SuperTack Pro H2C is the ideal choice as a main work plate or as a reliable upgrade for the H2C printer.

Key Features:

• Original Cool Plate SuperTack Pro for Bambu Lab H2C and H2C Laser 3D printers
• Ultra‑strong adhesion for PLA and PETG even at low bed temperatures
• Improved SuperTack Pro surface with longer lifespan and higher scratch resistance
• Significant reduction of warping effect in large and flat models
• Flexible steel plate – easy removal of prints by simple bending
• Smooth matte surface for an aesthetic bottom side of the print
• Energy-efficient operation thanks to lower heatbed temperatures
• Easy maintenance – cleaning with water and soap without the need for adhesives or sprays