Bambu Lab ABS Bambu Green 1kg

Bambu Lab ABS Bambu Green 1kg – durable technical filament for functional parts

Bambu Lab ABS Bambu Green is a high-quality ABS filament developed specifically for Bambu Lab 3D printers. It combines high mechanical strength, toughness, and thermal resistance, making it ideal for technical and functional prints used in demanding conditions.

The characteristic shade Bambu Green is a distinctive corporate green that stands out perfectly on covers, holders, mechanical components, and design models.

Key benefits of Bambu Lab ABS Bambu Green

• High thermal resistance – temperature resistance of prints up to approximately 90–100 °C, suitable for parts near motors, electronics, or in warmer environments.
• Excellent mechanical strength and toughness – suitable for prototypes, functional components, mechanically stressed parts, and industrial use.
• Stable printing and good layer adhesion – the filament is tuned for Bambu Lab printers (X1, P1, A1 series) and provides consistent results.
• Good impact resistance – ABS is suitable where standard PLA filament is not enough.
• Post-processing options – prints can be sanded, drilled, threaded, glued, and painted; the surface can be smoothed with acetone vapors for a smooth, glossy finish.
• Reusable spool with RFID – the filament is supplied on a lightweight, reusable Bambu Lab spool (PC+ABS) with an RFID tag that the printer automatically recognizes and loads the recommended profile.
• Optimized for AMS – fully compatible with the Bambu AMS system for multi-material and multi-color printing.

Recommended use

Bambu Lab ABS Bambu Green is particularly suitable for:

• functional and structural parts exposed to higher temperatures
• holders, grips, frames, and covers for electronics
• prototypes and industrial components where strength and toughness are needed
• interior automotive parts, fixtures, assembly aids
• models that will be additionally sanded, painted, or polished

For ABS printing, an enclosed printing space and proper ventilation are recommended, as vapors typical for technical plastics are produced during printing.

Printing settings (manufacturer recommendations)

• Filament diameter: 1,75 mm
• Nozzle temperature: 240–270 °C
• Bed temperature (with glue): 80–100 °C
• Recommended printing speed: up to approx. 300 mm/s (in practice often lower for better surface quality)
• Filament drying: 80 °C for approx. 8 hours
• Recommended storage humidity: < 20 % RH (sealed container with silica gel)

Using a suitable adhesive (glue, special spray, ABS juice) significantly reduces the risk of warping and peeling of parts.

Material properties (approximate)

• Material: ABS (Acrylonitrile Butadiene Styrene)
• Density: approx. 1,05 g/cm³
• Vicat softening temperature: ~94 °C
• Heat Deflection Temperature (HDT): ~87 °C
• Elongation at break: ~10 %
• Tensile strength: approx. 33 MPa
• Flexural modulus: approx. 1880 MPa
• Good resistance to water and many chemicals (always verify for the specific environment).

Values are typical for Bambu Lab ABS and may vary slightly depending on print settings and model geometry.

Compatibility

• Recommended for: Bambu Lab X1 / X1 Carbon, P1P, P1S, A1, A1 mini (for open printers, it is recommended to equip them with a cover for ABS printing).
• Compatible with other FDM printers using 1,75 mm filament that support ABS printing (heated bed, ideally enclosed chamber).

Tips for successful ABS printing

• Keep the printer away from drafts – avoid sudden temperature changes.
• Use an enclosure to minimize warping and layer cracking.
• Dry the filament before printing, especially if it has been in an open environment for a long time.
• For larger models, consider a brim/raft or a larger contact area with the bed.
• For a smooth, almost glossy surface, acetone smoothing can be used carefully (always in a well-ventilated area and with regard to safety).

Summary

Bambu Lab ABS Bambu Green 1kg is a great choice for users looking for a reliable technical filament with higher thermal and mechanical resistance, optimized for the Bambu Lab ecosystem. Thanks to the distinctive Bambu Green color and easy processing, it is suitable for functional parts, prototypes, and design projects where both function and appearance are important.

Key features:

• Premium ABS filament optimized for Bambu Lab printers (X1, P1, A1 series).
• High thermal resistance of prints, suitable for parts in warmer and technical environments.
• Excellent mechanical strength and toughness for functional and industrial applications.
• Characteristic Bambu Green color – a bold, rich shade for attractive models.
• Supplied on a lightweight, reusable Bambu Lab spool with an RFID chip for automatic profile detection.
• Very good layer adhesion and stable printing, compatible with Bambu AMS for multi-material printing.
• Possibility of post-processing (sanding, drilling, painting) and acetone vapor smoothing.
• Suitable for prototypes, functional components, electronics covers, holders, and assembly fixtures.