Two printing surfaces on one plate

The Weprinty Bambu Lab X1/P1/A1 textured PEI + PEO print plate combines a universal textured PEI surface with a smoother side featuring a PEO layer. Simply turn the plate over to choose the surface according to the material used and the desired appearance of the model's bottom surface.

Textured PEI for a reliable first layer

The textured PEI side provides good adhesion during printing and creates an even matte surface on the bottom of the model. It is particularly suitable for common materials such as PLA, PETG and TPU. The use of other filaments depends on the printer settings, bed temperature and the material manufacturer's recommendations.

PEO surface for an attractive print appearance

The other side of the plate uses a smoother PEO surface, which allows you to create a glossier and more decorative bottom layer. It is especially suitable for designer models, boxes, stands, signs and other prints where the appearance of the surface placed on the print bed matters.

Easy model removal

The spring steel core holds onto the printer's magnetic base and allows for convenient handling. After printing is complete, let the plate cool down and gently bend it – the model will usually release without the use of force or sharp tools.

Compatibility

The 257 × 257 mm plate is designed for:

• Bambu Lab X1
• Bambu Lab X1 Carbon
• Bambu Lab X1E
• Bambu Lab P1P
• Bambu Lab P1S
• Bambu Lab A1

It is not designed for the Bambu Lab A1 mini, which uses a smaller print bed.

Usage recommendations

• Before printing, check that the plate is correctly seated on the magnetic base.
• Clean the surface regularly with warm water and dishwashing detergent or suitable isopropyl alcohol.
• Do not touch the printing surface with your fingers – grease can reduce first-layer adhesion.
• Do not use acetone or metal scrapers on the surface.
• Let the plate cool down before removing the print.
• Set the bed temperature and print plate profile according to the selected surface and the filament used.

The magnetic base and other accessories are not included with the print plate.

Key features:

• Two different printing surfaces on one plate
• Textured PEI surface for a reliable first layer
• Smoother PEO side for an attractive model bottom surface
• Spring steel for easy print removal
• 257 × 257 mm dimensions for Bambu Lab X1, P1 and A1
• Quick replacement using the printer's magnetic base
• Suitable for PLA, PETG and TPU depending on the selected surface
• Reusable and easy-to-wash surface