Doprava zdarma od 1 999 Kč
Rychlá expedice
Ověřený obchod
Tisíce zákazníků
Doprava zdarma od 1 999 Kč
Double-sided flexible print plate for Bambu Lab H2D combines a textured PEI surface with a PET side. It offers reliable first-layer adhesion, the option to choose the appearance of the model's bottom side, and easy print removal after cooling.
Objednávky vyřizujeme a odesíláme ihned během pracovního dne.
The Weprinty print plate is a practical upgrade for the Bambu Lab H2D 3D printer. It combines a durable textured PEI surface with a smoother PET side, allowing you to choose the print surface according to the material used and the desired appearance of the first layer.
The supporting part is made of spring steel, which securely attaches to the printer's magnetic heated bed. After printing is complete, simply let the plate cool, remove it, and gently bend it. The model is released without unnecessary prying or the risk of damage.
The textured PEI surface provides good first-layer adhesion and creates an even matte texture on the bottom side of the print. It is particularly suitable for materials such as PLA, PETG, ABS, ASA, and selected engineering filaments.
The PET surface provides a smoother contact area and a decorative appearance for the bottom layer. It is primarily suitable for printing with PLA and TPU, as well as other materials depending on the print profile settings. The surface must be clean and degreased before printing.
| Surface | Typical materials | Bottom layer characteristic |
|---|---|---|
| Textured PEI | PLA, PETG, ABS, ASA and engineering filaments | Matte, finely textured |
| PET | PLA, TPU | Smoother, decorative |
Always set the specific bed temperature according to the filament used and its manufacturer. For materials with very strong adhesion, a thin separation layer of suitable adhesive can make model removal easier and protect the plate surface.
Before first use and whenever adhesion deteriorates, wash the plate with warm water and a small amount of dishwashing liquid. Then dry it thoroughly and do not touch the print surface with your fingers. Isopropyl alcohol can be used for routine degreasing. Do not use acetone or a metal scraper, as they may damage the PET or PEI surface.
Let the plate cool before removing the finished model. This will extend the life of the surface and reduce the risk of damage to the first layer of the print.