Two Printing Surfaces in One Plate

The Weprinty build plate for Bambu Lab H2D offers two different printing sides, allowing you to easily choose according to the material used and the desired appearance of the model. The textured PEI side provides reliable first-layer adhesion and creates an evenly matte texture. The PEO side is primarily intended for printing with a smooth, decorative surface on the bottom of the print.

Textured PEI Surface

The textured PEI layer is a universal choice for everyday 3D printing. It helps keep the model in place during printing while also concealing the traces of individual first-layer lines. It is suitable for common as well as selected technical filaments, such as PLA, PETG, ABS, ASA or TPU. Always adjust the specific bed temperature to the material being used.

Smooth PEO Side with a Decorative Effect

The PEO surface transfers its fine pattern to the bottom of the print and makes it possible to achieve a smooth, glossy, and optically changing appearance. It is best suited for materials with lower bed-temperature requirements, especially PLA and TPU.

Easy Removal of Finished Models

The spring steel core allows you to slightly bend the plate after it has cooled. The print will usually release without using a spatula and with a lower risk of damaging the model or the printing surface. Magnetic attachment ensures quick installation and a stable position during printing.

Precisely Designed for Bambu Lab H2D

The approximately 355 × 346 mm size corresponds to the build plate of the Bambu Lab H2 series. The plate is designed for the Bambu Lab H2D printer and allows you to make use of its large printing area.

Recommended Use

• Before printing, check that the plate is properly seated on the magnetic bed.
• Keep the surface clean and avoid touching the printing surface with greasy fingers.
• For regular cleaning, use water with dishwashing detergent or isopropyl alcohol and a clean cloth.
• Do not use aggressive solvents, especially acetone.
• Allow the plate to cool before removing the model.
• For PETG and some flexible or technical materials, a thin layer of release adhesive may be suitable to protect the surface from excessively strong adhesion.
• In Bambu Studio, select the build plate profile corresponding to the side being used and adjust the bed temperature as needed.

Key Features:

• Two printing surfaces in one plate: textured PEI and smooth PEO
• Precise design for the Bambu Lab H2D 3D printer
• Reliable first-layer adhesion on the textured PEI side
• Decorative smooth appearance of the bottom of the print from the PEO surface
• Spring steel for easy model removal after cooling
• Magnetic attachment without complicated installation
• Approximately 355 × 346 mm for the large printing area of the H2 series