Double-sided PEI build plate for Bambu Lab H2C

Expand your Bambu Lab H2C printer with the practical Weprinty double-sided build plate. Both sides feature a textured PEI surface that supports reliable first-layer adhesion and creates a professional textured appearance on the bottom surface of the model.

The build plate has a gold finish on both sides. Thanks to the two usable sides, you can alternate the surfaces regularly and extend the service life of the build plate.

Easy print removal

The flexible spring steel core allows you to remove the build plate after printing and bend it slightly. The cooled model will generally come off without laborious prying with a spatula. The printer's magnetic attachment also ensures quick installation and a stable position during printing.

QR code for build plate identification

The integrated QR code is intended for the Bambu Lab build plate checking system. With compatible printer settings, it helps verify that the installed build plate matches the type selected in the print profile.

Suitable for standard and technical materials

The textured PEI surface can be used with a wide range of FDM filaments, for example:

• PLA and its modifications
• PETG
• ABS and ASA
• TPU
• PC and PA with the appropriate print profile
• Selected composite filaments

Always use the build plate temperature recommended by the filament manufacturer. For materials with very strong adhesion, a thin separating layer of adhesive may be suitable to protect the PEI surface when removing the model.

Main advantages

• Precise compatibility with Bambu Lab H2C
• Two fully usable textured PEI sides
• Gold finish on both sides
• Reliable first-layer adhesion
• Distinctive texture on the bottom of the print
• Flexible steel for easy removal of finished models
• QR code for checking the build plate type
• Suitable as a replacement or additional build plate

Maintaining the print surface

To maintain good adhesion, avoid touching the print surface with greasy fingers. Regularly wash the build plate with warm water and regular dishwashing detergent, then dry it thoroughly. Ideally, remove models only after the build plate has cooled.

Key features:

• Double-sided textured PEI surface
• Designed for the Bambu Lab H2C printer
• Gold print surface on both sides of the build plate
• QR code for checking the build plate type
• Spring steel for easier print removal
• Good first-layer adhesion
• Textured surface on the bottom of the model
• Suitable as a replacement or additional build plate