Prof. Lab Resin Standard Green – universal green resin for detailed 3D printing

Prof. Lab Resin Standard Green is a standard photopolymer resin designed for desktop LCD/MSLA 3D printers with UV LEDs at a wavelength of 405 nm. It offers a great price-to-performance ratio – fine details, a smooth surface, and reliable printing without complex tuning. The green shade is very popular for figurines, technical models, and presentation prototypes where clearly legible details and a clear surface coloring are needed.

---

Key advantages

• Universal standard resin – suitable for most common applications, from prototypes to decorative models.
• Compatible with 405nm LCD/MSLA printers – works with popular brands such as Anycubic, Creality, Elegoo, Phrozen, etc.
• Very good detail resolution – sharp edges, legible engravings, and fine structures.
• Smooth surface after printing – minimizes the need for complex sanding or filling.
• Good combination of strength and hardness – ideal for presentation and lightly functional parts.
• Relatively low odor compared to low-quality cheap resins.
• Consistent batch quality – stable viscosity and printing behavior.

---

Typical use

• Figurines and models (board games, collectible figures, miniatures)
• Design prototypes and presentation models
• Technical and construction parts for shape and assembly verification
• Decorations and small accessories with high visual requirements

---

Recommended print settings

Specific values may vary slightly depending on the printer and layer thickness. We always recommend printing a calibration test model.

• UV wavelength: 405 nm
• Layer thickness: 0,025–0,05 mm (recommended 0,05 mm for normal printing)
• First layer exposure time: approx. 25–40 s
• Normal layer exposure time: approx. 2–3 s
• Ambient printing temperature: 20–28 °C

---

Post-processing (finishing prints)

1. Washing the model
   • Immediately after printing, rinse the model in isopropyl alcohol (IPA) or technical alcohol.
   • The use of an ultrasonic cleaner or resin washer is recommended for uniform cleaning.
2. Support removal
   • Remove supports after pre-washing while the resin is still slightly flexible.
3. Additional curing (UV curing)
   • Expose the model to UV light for 5–15 minutes (UV chamber / UV lamp / direct sunlight) until the surface is fully cured.
4. Safety and handling
   • Always use gloves and a well-ventilated environment when working.
   • Do not pour unprocessed resin or waste alcohol down the drain; dispose of it as hazardous waste according to local regulations.

---

Material properties

• Type: Standard photopolymer resin for LCD/MSLA 3D printing
• Color: Green
• Wavelength: 405 nm
• Character: hard, standard, with good detail rendering
• Surface: smooth, matte to slightly satin after curing

---

Who is Prof. Lab Resin Standard Green ideal for?

• For beginners who want a reliable and forgiving resin to learn with.
• For advanced users looking for an affordable standard resin for everyday printing.
• For modelers and designers who care about detail and clean rendering.

If you are looking for a green standard resin with a good ratio of price, quality, and ease of use, Prof. Lab Resin Standard Green is a great choice for your resin 3D printer.

Key features:

• Standard UV resin for LCD/MSLA printers with a wavelength of 405 nm
• Green color suitable for figurines, models, and technical prototypes
• High detail resolution and smooth print surface
• Good combination of strength and hardness for general use
• Relatively low odor and stable printing behavior
• Compatible with most desktop resin 3D printers
• Suitable for beginners and advanced users looking for a universal standard resin