Product Description

Reflective markers for 3D scanner with a diameter of 6 mm are intended as reference marks for optical measuring systems, 3D scanners, and photogrammetry. The package contains 2000 pieces of precisely punched, retroreflective self-adhesive markers on a carrier film.

These markers increase measurement accuracy, facilitate the registration of multiple scans, and ensure a stable reference coordinate system for small and medium-sized parts. Thanks to a special surface treatment, they are highly reflective even from low angles and yet can be easily removed from the workpiece surface after measurement.

They are compatible with a wide range of industrial 3D scanners and photogrammetric systems (e.g., Creaform HandySCAN, Go!SCAN, Zeiss T-Scan Hawk, Shining3D FreeScan, Hexagon, etc.).

Key Features

• Reflective surface diameter: 6 mm – universal size for most handheld and desktop 3D scanners
• Quantity in package: 2000 pcs – sufficient quantity for repeated projects and larger measuring tasks
• Retroreflective surface – very high reflectivity for laser and structured light systems
• Self-adhesive design – simple and fast application on metal, plastic, composite, or painted surfaces
• Precise die-cutting and concentric design – ensures consistent detection and accurate center point determination
• Easy removability – special surface and adhesive allow peeling without damaging most substrates
• Suitable for industrial metrology, quality control, reverse engineering, and prototype development

Usage

Reflective markers are intended as uncoded targets for:

• 3D scanners (laser, structured light)
• Photogrammetric systems and systems for digital shape measurement
• Optical coordinate measuring machines

Typical use:

1. Creating a reference coordinate system on a part or assembly.
2. Registration of multiple scans into one file (merging scans from different positions).
3. Increasing measurement accuracy and stability on complex shapes or shiny surfaces.
4. Inspection, quality control, deviation analysis, reverse engineering.

Practical Application Suggestion

• Place markers evenly over the surface of the scanned object, especially around edges, holes, and critical areas.
• Ensure that the markers are visible from several scanning positions to ensure stable registration.
• Clean the surface of dust, grease, and loose particles before application to ensure good adhesion.
• After finishing the measurement, the markers can be carefully peeled off; for sensitive surfaces, we recommend performing a test on a less visible area beforehand.

Technical Parameters

Compatibility (examples)

Reflective markers 6 mm can be used with many professional systems, for example:

• Creaform HandySCAN, Go!SCAN, MaxSHOT
• Zeiss T-Scan Hawk
• Shining3D FreeScan
• Hexagon and other optical measuring systems

(The list is indicative – markers are generally applicable to most 3D scanners supporting reflective targets with a diameter of 6 mm.)

Who is the product suitable for

• Industrial enterprises and tool shops
• Metrological and testing laboratories
• Development and design departments
• 3D scanning and reverse‑engineering studios

Reflective markers for 3D scanner – 6 mm – 2000 pieces are a practical and cost-effective consumable that significantly facilitates work with professional 3D scanners and optical measuring systems.

Key Features:

• Universal 6 mm diameter for most professional 3D scanners
• Package of 2000 pieces – suitable even for larger projects and serial measurements
• Highly retroreflective surface for reliable detection even from low angles
• Precise and concentric die-cutting for consistent center point determination
• Self-adhesive design allows fast application on various materials
• Easy removal after measurement without damaging common surfaces
• Suitable for metrology, reverse engineering, and quality control
• Compatible with many professional systems (Creaform, Zeiss, Shining3D, etc.)