Product description

Original extruder for the QIDI Q2 3D printer. The design with dual hardened steel drive gears increases pressure on the filament, reduces slipping, and ensures consistent material flow even with more demanding filaments. The extruder is intended for the direct‑drive feeder of the QIDI Q2 printer.

Why choose this extruder

• Higher extrusion force and stable feeding thanks to hardened dual gears.
• Precise material dosing for a high‑quality first layer and print surface (in combination with QIDI Q2 calibration).
• Also suitable for abrasive and technical materials (e.g. CF/GF composites) – recommended with a corresponding hardened nozzle.
• The extruder gear ratio on the QIDI Q2 is 8.9:1 for fine control of feeding.

Compatibility

• Only: QIDI Q2 3D printer (1,75mm filament; direct‑drive).

Installation notes

• Install according to the official QIDI manual for the Q2 model; after replacement, check calibration and perform a filament feeding test.

Package contents

• 1× QIDI Q2 Extruder (original spare part).

Tip: For long extruder life, keep filament dry and clean and regularly check the pressure of the drive gears.

Key features:

• Original spare part directly from QIDI
• Dual hardened steel gears – higher pressure, less slipping
• Stable and precise feeding for a high‑quality first layer
• Designed for the QIDI Q2 direct‑drive system
• Also suitable for technical and abrasive materials (with a corresponding nozzle)
• Easy replacement according to the official manual