Prof. Lab Resin ABS-like, Green
Prof. Lab Resin ABS-like, Green is a specially developed resin for 3D printing on LCD/UV (MSLA) printers, combining higher toughness and durability with fine print details. Thanks to its mechanical properties, it resembles ABS plastic – prints are less brittle than standard resins and better resist impacts and bending.
The green opaque shade is ideal for prototypes, technical parts, figurines, and models where you need clearly legible details and a good base for further surface treatments (filling, sanding, lacquering, painting).
Key Features
- ABS-like mechanical properties – higher toughness, less brittle prints than standard resin
- High precision and detail – sharp edges, fine structures, suitable for technical parts and figurines
- Green color – well-readable details, suitable for visual model inspection and subsequent painting
- Compatible with common LCD/UV printers (405 nm)
- Lower shrinkage than conventional hard resins – better dimensional accuracy
- Good impact resistance within the ABS-like resin category
- Suitable for prototyping, mechanical parts with moderate stress, covers, holders, mock-ups, and models
Recommended Use
Prof. Lab Resin ABS-like, Green is suitable for:
- functional prototypes and test parts
- small technical components, holders, covers, and fixtures
- models and figurines with fine details
- parts that need better impact resistance than common standard resin
For maximum strength and durability, we recommend thorough curing in a UV chamber after cleaning the print in isopropyl alcohol or a suitable cleaning solution.
Technical Parameters
The values listed are typical for the ABS-like resin category intended for 405nm LCD printers. Specific settings may vary slightly depending on the printer type and printing conditions.
\n
- Material Type: ABS-like photopolymer resin
- Color: Green (opaque)
- Intended for printers: LCD / MSLA / DLP with UV LED 405 nm
- Recommended wavelength: 405 nm
- Recommended exposure times:\n
- bottom layers: 25–40 s (depending on display power)
- regular layers: 1.8–3.0 s (depending on layer height and printer)
- Recommended layer height: 0.025–0.1 mm
- Hardness (Shore D): approx. 75–85 (typical for ABS-like resins)
- Viscosity: medium (typically 150–300 mPa·s at 25 °C)
- Shrinkage during curing: low, suitable for dimensionally accurate parts
- Ambient operating temperature during printing: 20–28 °C
- Recommended print cleaning: isopropyl alcohol (IPA) or special resin cleaning solution
- Recommended final curing: UV lamp / UV chamber, 5–15 min depending on model thickness
- Packaging: bottle (typically 0.5–1 l)
Safety and Storage
- Use gloves and eye protection when working, avoid direct skin contact
- Work in a well-ventilated area
- Do not expose to direct sunlight, store in a dark and dry place at room temperature
- Keep out of reach of children and pets
Tips for Successful Printing
- Shake the bottle well before each use to ensure fillers and pigment are evenly mixed
- When switching from another resin, we recommend cleaning the vat and FEP film
- For optimal results, perform a short test print and fine-tune exposure times
- After printing, let the model drip back into the vat before cleaning in IPA/cleaning solution
This green ABS-like resin from Prof. Lab is a great choice for users seeking a compromise between durability, detail, and ease of processing in resin 3D printing.
Key Features:
- ABS-like resin with higher toughness and impact resistance than standard resins
- High precision and fine details for technical models, figurines, and prototypes
- Green opaque shade for good detail readability and easy painting
- Compatible with common LCD/UV/MSLA 3D printers (405 nm)
- Lower shrinkage and better dimensional accuracy of prints
- Ideal for functional prototypes, small mechanical parts, holders, covers, and visual models
- Easy post-processing – sanding, drilling, lacquering, painting
