The DQ2 Volcano 0.6 mm NozzleX print head is an interchangeable print head designed for TRILAB DeltiQ 2 and DeltiQ 2 Plus 3D printers. The main advantages of this print head are:

• E3D Volcano hotend for optimal filament melting when printing with larger nozzles
• NozzleX nozzle with a 0.6 mm diameter made of hardened, wear-resistant material
• Suitable for printing abrasive materials such as composite filaments with carbon fibers
• Enables printing of taller layers (up to 0.48 mm) and achieving higher print speeds
• Simple replacement of the entire print head within a few minutes

Technical Specifications

• Hotend type: E3D Volcano
• Nozzle diameter: 0.6 mm
• Nozzle material: NozzleX (hardened steel with DLC coating)
• Maximum temperature: 300°C
• Recommended layer height: 0.15 - 0.48 mm
• Compatible filaments: PLA, PETG, ABS, ASA, PC, nylon, composite materials

Advantages over the standard print head

• Up to 60% higher print speed thanks to increased material flow
• Ability to print taller layers for faster printing of large models
• Wear resistance when printing abrasive materials
• Improved thermal performance thanks to the extended melt zone of the Volcano hotend

This print head is an ideal choice for users who want to achieve higher print speeds, print larger models, or use abrasive materials. Thanks to the easy replacement of the entire print head, you can effortlessly switch between different configurations according to current printing needs.