PLA filament 1,75 mm is the most universal material for FDM printing technology, also suitable for printing large objects. Thanks to its simple properties, we recommend PLA to all beginners starting with 3D printing. Another big advantage is its 100% ecological biodegradability, as PLA is made from renewable resources such as corn starch. PLA material is hard and durable, just like other plastics, however, it is not a material suitable for outdoor use because in such cases it degrades and becomes brittle under UV light.

PLA Surface Treatment

The material is difficult to sand; during sanding (by friction), heat is generated, which causes "pulling" of fibers from the print. Therefore, during manual sanding, it is recommended to cool the print, for example by sanding under water. For the same reason, it is also difficult to drill holes into the print (again, a problem with heating). It is suitable to first spray the object with filler (putty used in modeling) and then sand and repaint again and again - until the surface is completely smooth, and finally spray it with paint.

Gluing PLA

Cyanoacrylate glue (superglue) with a spray activator (sometimes superglue alone may be enough).

Recommended Settings for PLA Printing

Commonly used nozzles are suitable. You can choose diameters according to the surface fineness you want to achieve or according to the layer thickness settings during printing. Printing temperature: 210 °C. PLA filament requires a heated bed, but for better material adhesion, it is recommended to heat it up to 55 °C. Furthermore, we do not recommend covering the printer in an enclosure for printing PLA filament, or keep it open. For a high-quality print surface, it is necessary to cool the plastic after the nozzle as quickly as possible. We therefore recommend setting the plastic cooling fan on the printer to 100%.

The filament is supplied vacuum-packed together with a moisture absorber and placed in a cardboard box. The plastic spools on which the filament is wound may differ in embossing or color. We strive to maintain 100% repeatability of the winding and spool color.