Filament PM PEIJet 1010 Ultem – Natural 0,5 kg

Filament PM PEIJet 1010 Ultem – Natural

Filament PM PEIJet 1010 is a top-tier industrial material based on polyetherimide (PEI, ULTEM 1010). It excels in temperature resistance over 200 °C, dimensional stability, self-extinguishing properties (UL94 V0 and 5VA) and high strength and toughness. Ideal for functional parts, jigs, covers and components that must withstand heat, chemicals and mechanical stress.

Warning: PEI is a material for advanced users and industrial 3D printers. It requires precise temperature control, a closed chamber and proper drying of the material before printing.

Key Features

• PEI/ULTEM 1010 – material for demanding industrial applications
• Thermal resistance >200 °C, excellent dimensional stability in heat
• Self-extinguishing: UL94 V0 and 5VA
• High flexural modulus, strength and toughness
• High chemical resistance
• Precise manufacturing, typical diameter tolerance ±0,05 mm
• Spool made from 100% recycled material

Recommended Print Settings

• Nozzle: 350–370 °C (manufacturer recommendation: approx. 360 °C)
• Bed: 140–150 °C (in print settings 120–150 °C depending on conditions)
• Chamber: closed, heated min. ~70 °C
• Adhesion: use MAGIGOO HT or another adhesive for high-temperature plastics; apply in 3 thin layers
• Drying: PEI is highly hygroscopic – dry before each print at approximately 110 °C
• After printing, remove the model as soon as possible; during cooling, stress builds up in the part and there is a risk of damaging the bed.

Typical Use

• Functional parts in automotive, electrical engineering, power industry
• Jigs, holders, covers, housings and components exposed to heat and chemicals
• Replacement of metal parts where low weight and high thermal stability are required

Why Filament PM

• Czech manufacturer with tradition and precise quality control
• Wide support for industrial materials and sustainable production (recycled spools)

Tips for Success

• Keep the material dry (dry boxes, sealable bags with silica gel)
• Minimize drafts and temperature fluctuations, print in a closed chamber
• For larger parts, consider brim/raft and lower speed for better layer cohesion

— Package contents: 1× spool 0,5 kg PEIJet 1010 Ultem in color Natural.

Key Features:

• PEI/ULTEM 1010 for industrial use and functional parts
• Thermal resistance over 200 °C and high dimensional stability
• Self-extinguishing material with UL94 V0 and 5VA
• High strength, toughness and flexural modulus
• High chemical resistance to common chemicals
• Precise manufacturing – typical tolerance ±0,05 mm
• Requires heated chamber and careful drying – for advanced printers
• Spool from 100% recycled material