ERYONE PLA Wood in Charcoal Ash gives prints a dark wood appearance, a matte surface, and a subtle wood grain. The wood powder and fiber additive helps reduce the visibility of layers, making the filament especially suitable for decorations, models, and desktop accessories.

What to expect from the filament

• PLA with a wood additive and a naturally textured surface
• Charcoal Ash variant in a shade reminiscent of charcoal
• Matte appearance that helps hide individual layer lines
• Diameter 1,75 mm with a tolerance of ±0,03 mm
• Net filament weight 1 kg

Recommended print settings

• Nozzle temperature: 190-220 °C
• Build plate temperature: 55-70 °C
• Print speed: 30-60 mm/s

What to consider before printing

The wood additive may cause greater wear to softer brass nozzles during prolonged printing. ERYONE therefore recommends using a nozzle made of a harder material. At temperatures above 225 °C, the wood powder may carbonize and cause clogging, so stay within the recommended range.

Compatibility

The filament is intended for most FDM 3D printers and 3D pens that use 1,75 mm diameter filament.