Original Klipper mainboard for Elegoo OrangeStorm Giga

Elegoo ZNP GIGA V3.0 32G is an original mainboard and computing board designed specifically for the large-format Elegoo OrangeStorm Giga 3D printer. It serves as the printer's central control unit and handles G-code processing, motion-axis coordination, temperature regulation, sensor management, and communication with other modules.

The board combines a computing section based on a 64-bit quad-core Rockchip RK3328 processor with a control microcontroller. Its native Klipper architecture enables fast command processing and precise control of the extensive motion system of the OrangeStorm Giga printer.

32GB eMMC storage

This variant includes a 32GB eMMC module, which serves as internal storage for the operating system, firmware, configuration, and files required for Klipper operation. Compared with standard memory cards, eMMC offers a stable and compact solution designed for permanent installation in the printer.

Comprehensive printer control

The mainboard controls the printer's main electronic and mechanical functions, including:

• movement of the X, Y, and Z axis motors,
• extrusion and print head control,
• hotend and heated build plate section regulation,
• processing of data from temperature and position sensors,
• automatic bed leveling,
• communication with the touchscreen display,
• network and USB connectivity,
• communication with the print head electronics via the CAN bus.

Ready for the Klipper platform

The RK3328 processor's computing power enables the use of advanced Klipper platform features such as precise motion planning, Input Shaping, and Pressure Advance. The board is designed for demanding operation of a large-format printer and coordination of the expandable OrangeStorm Giga print head system.

Direct replacement for the original electronics

The ZNP GIGA V3.0 is particularly suitable as a replacement part in the event of a failure of the original mainboard. It retains the original electronics, connector, and communication design of the Elegoo OrangeStorm Giga printer.

Notice: This is a specialized electronic replacement part. Before ordering, verify the designation and revision of the original board. Install it only with the printer disconnected from the power supply, and we recommend entrusting the installation to an experienced service technician. After replacement, it may be necessary to upload the appropriate firmware and restore the printer configuration.

Key features:

• Original mainboard for Elegoo OrangeStorm Giga
• ZNP GIGA V3.0 revision
• 32GB internal eMMC storage
• Native support for the Klipper platform
• 64-bit quad-core RK3328 processor with a frequency of up to 1.5 GHz
• Control of the printer's motion, temperatures, sensors, and heated zones
• Support for communication with the print head via the CAN bus
• Network connectivity via Ethernet and Wi-Fi
• Support for the expandable OrangeStorm Giga print head system
• Direct replacement for the original mainboard with the same part number