Creality SpacePi X4L – smart filament dryer for 4 spools

Creality SpacePi X4L is a compact but very powerful filament dryer designed for modern FDM 3D printing. It allows drying up to 4 spools simultaneously in two independent chambers, so you can easily prepare different materials or colors for multi-extruder and multicolor prints.

Thanks to precise temperature control 45–75 °C, smart humidity sensors and quality thermal insulation, the SpacePi X4L helps remove moisture from filaments, restore their printing properties and ensure smooth extrusion without popping, bubbles and stringing.

Key features

• Capacity up to 4 spools Two drying chambers, each for 2 spools, allow you to prepare more materials or colors at once. Ideal for multicolor printing, AMS/CFS systems or larger print farms.
• Two independent drying chambers Each chamber has its own PTC heating element and separate temperature control. You can, for example, dry PLA in one chamber and PA or PC in the other at a different temperature.
• Temperature range 45–75 °C Max. temperature 75 °C is ideal for a wide range of materials – from PLA and PETG through ABS/ASA to selected engineering plastics (PA, PC, PP) according to the filament manufacturer's recommendations.
• Flexible drying modes and energy saving Switching between single-chamber and dual-chamber mode allows saving up to approx. 40% energy if you only need to dry a smaller number of spools.
• Smart sensors and precise control Integrated temperature and humidity sensors control the drying process and maintain stable conditions for consistent results. The filament remains in optimal condition even during longer storage.
• Support for common and large spools Supports spools with a diameter up to 200 mm and width up to 150 mm, for filaments with a diameter of 1.75 mm and 2.85 mm. Fits standard 1kg and larger 2kg spools (depending on spool dimensions).
• Safe operation and quality insulation Double thermal insulation keeps high temperature inside, while the outer surface remains significantly cooler and safe to touch. Built-in double overheating protection increases safety during long-term operation.
• Practical design for integration with 3D printing SpacePi X4L can be used as a dry filament feeder – filament can be routed to the printer directly through a PTFE tube and printed from dried spools.

Benefits for your 3D printing

• Better surface quality and details thanks to the removal of microbubbles and unwanted stringing caused by moisture.
• Higher part strength – dry filament melts better, layers better and is less brittle.
• More reliable long prints, where moisture often causes problems in the later stages of printing.
• More efficient workflow – you dry more spools at once, you can dry and print simultaneously.

Recommended use

SpacePi X4L is suitable for:

• owners of Creality (Ender, K-series, CR-series) printers and other FDM brands,
• users of AMS/CFS or other multi-material systems,
• print farms and advanced hobby users who work with multiple materials,
• everyone who solves problems with wet filament – popping, bubbles, matte surface, weak layers.

Technical parameters

The stated values may be slightly updated by the manufacturer. In case of critical parameters (especially recommended temperatures for a specific filament), always follow the filament manufacturer's specification as well.

Who is SpacePi X4L ideal for?

• Beginner users who want easy and preset drying of common filaments.
• Advanced and professional users who work with multiple materials, a larger number of printers or print long orders.

Creality SpacePi X4L will help you stabilize print quality, reduce scrap rate and better utilize the potential of your filaments and 3D printers.

Key features:

• Drying up to 4 filament spools simultaneously in two independent chambers
• Independent PTC heating in each chamber for individual temperature settings
• Drying temperature range 45–75 °C for a wide range of materials
• Flexible single-chamber/dual-chamber mode with energy saving
• Smart temperature and humidity sensors for a stable and controlled drying process
• Support for spools with a diameter of up to 200 mm and width of up to 150 mm
• Compatible with 1,75 mm and 2,85 mm filaments
• Possibility of drying and simultaneous printing – the device can be used as a dry filament feeder
• Double thermal insulation and overheating protection for safe operation
• Compact dimensions and design suitable for print farms and multicolor setups