Creality AFU Feed Unit for HALOT‑X1

Creality AFU (Auto Feed Unit) Feed Unit for HALOT‑X1 is an original automatic resin reservoir designed specifically for Creality / PioCreat HALOT‑X1 resin printers. It fully automates resin management – from refilling and heating to level monitoring – significantly simplifying the entire printing process.

An ideal add‑on for users who print long series of models, let the printer run overnight, or want maximum comfort and assurance that the print will not run dry.

---

Main advantages of the AFU module

• Automatic resin refilling
  The laser sensor constantly monitors the resin level in the vat. As soon as it starts to drop, the AFU automatically refills the required amount from the connected bottle.
• Automatic reverse pumping (recycling)
  After printing is finished, the system can automatically pump the remaining resin back into the bottle. This saves material, speeds up cleanup, and reduces the risk of spills.
• Integrated resin heating (30–45 °C)
  The built‑in heater keeps the resin in the range of 30–45 °C, which improves viscosity and increases print success in a cold environment. Printing is more stable and details are sharper.
• RFID material identification
  The AFU has an RFID reader that recognizes compatible bottles with an RFID tag. The HALOT‑X1 printer can then automatically load the corresponding material profile and make setup easier.
• Laser level measurement
  A precise laser sensor evaluates the liquid level height in real time and controls resin feeding or pumping accordingly. It minimizes the risk of overfilling or shortage.
• Detection of remaining volume in the bottle
  The AFU can detect when the resin in the bottle is running low and timely evaluate feeding problems – reducing the number of failed prints.
• Error detection
  Built‑in sensors monitor system operation (feeding, heating, measuring). In case of deviations or errors, the AFU informs the printer so it can alert the user to the problem.
• Plug‑and‑play for HALOT‑X1
  The unit is designed as a direct accessory for HALOT‑X1 / HALOT‑X1 Combo. Just mount it to the printer, connect the cable, attach a resin bottle, and activate the functions in the printer menu.

---

Main features and functions

• Original Creality / PioCreat AFU module for HALOT‑X1
• Resin auto fill system – automatic resin feeding
• Auto recovery – automatic reverse pumping of excess resin after printing
• Feed heating 30–45 °C – smoothly controlled resin heating
• RFID material identification – resin identification via RFID tag
• Laser Sensing Distance Measurement – laser level measurement in the vat
• Resin bottle residual detection – detection of remaining amount in the bottle
• Failure detection – monitoring of feeding / sensing errors
• Clean, compact design, easy to clean
• Simple control directly from the HALOT‑X1 printer interface

---

Typical use

• Long overnight or multi‑day prints where there is a risk of resin depletion.
• Serial production of miniatures, figurines, jewelry, and prototypes when you want as few manual interventions as possible.
• Printing in a colder workshop or office, where printing is less stable without heating.
• Users who want maximum comfort, less mess, and a lower risk of failed prints due to lack of resin.

---

Technical specifications

Parameter	Value
Name	Creality AFU Feed Unit for HALOT‑X1
Printer compatibility	Creality / PioCreat HALOT‑X1, HALOT‑X1 Combo
Feeding function	Automatic resin refilling from bottle to vat
Recycling function	Automatic pumping of excess resin back into the bottle
Heating range	approx. 30–45 °C (adjustable / system‑controlled)
Level measurement technology	Laser Sensing Distance Measurement (laser distance sensor)
Material identification	RFID material identification – reading the RFID tag on compatible bottles
Bottle detection	Resin bottle residual detection – monitoring of remaining volume
Error detection	Failure detection – error states of feeding, heating, sensing
Power supply	Via HALOT‑X1 printer interface (no separate power source)
Purpose	Accessory for resin printer, auto feed system
Color	Usually gray / black (depending on current manufacturer batch)
Manufacturer	Creality / PioCreat

(The specific appearance and minor design details may vary depending on the production batch.)

---

Package contents

• 1× Creality AFU Feed Unit for HALOT‑X1
• Connection cable to HALOT‑X1 printer
• Mounting / fastening accessories (according to manufacturer packaging)
• Basic installation and user guide (EN / according to manufacturer)

---

Recommendations for use

• Use compatible resin bottles recommended by the printer manufacturer.
• Always check that there is enough resin in the system before turning on the heating.
• Keep the optical and measuring parts (laser sensor) clean and free of cured resin.
• For maximum service life, regularly clean surfaces from dripping resin and dust.

---

This module is a great upgrade for every HALOT‑X1 owner who is looking for a reliable, convenient, and modern way to manage resin without constantly monitoring the vat level.

Key features:

• Original Creality AFU Feed Unit designed for HALOT‑X1 resin printers
• Fully automatic refilling and reverse pumping of resin from the bottle to the print vat
• Integrated resin heating in the range of approximately 30–45 °C for stable printing even in cold conditions
• RFID material identification for easier setup of print profiles
• Laser resin level measurement and detection of remaining volume in the bottle
• Advanced detection of feeding, level, and heating errors that reduces the risk of failed prints
• Easy installation and control – fully integrated into the HALOT‑X1 printer environment
• Ideal for long series, overnight prints, and professional use with minimal manual intervention