Bambu Lab Support for PLA/PETG Black 0,5 kg

Bambu Lab Support for PLA/PETG Black 0,5 kg

Bambu Lab Support for PLA/PETG is a premium breakaway support material designed specifically for printing with PLA and PETG filaments. The Black variant is ideal for technical parts, design models, and printing complex geometries where you require clean surfaces after support removal without the need for laborious sanding.

Thanks to optimized adhesion to both PLA and PETG, this filament creates a smooth support interface, yet easily detaches by hand after printing. It is fully compatible with Bambu Lab printers and AMS automatic material feeders, making it perfectly suited for multi-material printing and automatic material swapping.

Main advantages

• Special breakaway support for PLA and PETG Optimized adhesion to PLA and PETG (including their composites) for reliable printing of complex overhangs, bridges, and internal cavities.
• Easy manual removal without tools Supports can be simply broken off by hand after printing, without the need for pliers or knives – minimizing the risk of damaging the model.
• Smooth interface and quality surfaces The support material creates a clean contact with the model, so the surface remains less damaged after removal than with conventional single-component supports.
• Bambu Lab AMS compatibility Designed for reliable operation in Bambu Lab AMS / AMS HT, including automatic filament profile recognition in Bambu Studio.
• Reusable high-temperature spool The filament is wound on a sturdy recyclable spool made of durable PC+ABS material, which can be reused for other Bambu Lab filaments.

Recommended use

• Supports for PLA and PLA composites (e.g., PLA-CF)
• Supports for PETG and PETG composites (e.g., PETG-CF)
• Printing models with:
  • significant overhangs and bridges
  • complex internal cavities
  • fine details sensitive to tool damage
• Suitable for multi-material printing in combination with the main material in a different color

Printing recommendations (indicative)

Always check exact values in the preset profile in Bambu Studio for the given printer model.

• Nozzle temperature: typically in the range of approx. 220–240 °C
• Bed temperature: approximately 60–80 °C depending on the model material
• Printing speed: adapt to the chosen support profile; standard Bambu Lab profiles are already optimized
• Cooling: according to the PLA/PETG profile, no special settings required

For best results, use the preset filament "Support for PLA/PETG" in the slicer and select it as the support material or support interface for models made of PLA or PETG.

Advantages over standard supports

• Significantly easier removal than supports made from the same material as the model
• Less visible marks from the support on the finished part
• Saves time during post-processing (less sanding and finishing)
• Reduces the risk of cracks and broken details when removing supports

Package contents

• 1× spool Bambu Lab Support for PLA/PETG Black
• Net weight of filament: 0,5 kg
• Reusable PC+ABS spool

Storage

To maintain stable printing properties, store the filament:

• in a dry place away from direct sunlight
• ideally in a sealable box with desiccant

Before long-term printing, it is advisable to dry the filament in case of moisture absorption according to the manufacturer's recommendations.

Key features:

• Special breakaway support material for PLA and PETG
• Designed for a smooth support interface and clean model surfaces
• Easy and fast manual support removal without tools
• Compatible with PLA, PETG, and their composite variants
• Full compatibility with Bambu Lab printers and the AMS system
• Filament on a reusable high-temperature PC+ABS spool
• Ideal for complex models with overhangs, bridges, and internal cavities
• Net filament weight 0,5 kg, diameter 1,75 mm