Bambu Lab Magnetic Levitation DIY Kit – ZC008

Imagine your 3D printed lamp, figurine, or planet model quietly levitating in the air – no tricks, just a precisely controlled magnetic field. Bambu Lab Magnetic Levitation DIY Kit – ZC008 is an original DIY kit from Bambu Lab, designed especially for makers and 3D printing enthusiasts who want to give their prints a unique wow effect.

---

Key features

• Magnetic levitation up to approx. 200 g
  Load capacity up to around 200 g (without the "float" module itself) with proper center-of-gravity balancing – ideal for most smaller decorative 3D models.
• Electromagnetic induction – no batteries
  Powered by the included DC 12 V / 2 A adapter, no batteries or complex wiring in the levitating part.
• Integrated LED lighting
  The base contains LEDs with touch control and three modes: cool white, warm white, and warm yellow – perfect for ambient illumination of the model.
• Quiet and stable operation
  With proper center-of-gravity setup, the model levitates quietly and remains stable until there is a major disturbance or the power is disconnected.
• Protective 3D printed cover
  The set includes a 3D printed protective shell for the sensitive parts of the module, which helps protect the kit during the first levitation attempts and handling.
• Official documentation and models
  Quick Start, Design Guidelines, and 3D models are available for easier design of your own levitation projects (e.g., jigs and holders).

---

How the kit works

The base creates a controlled electromagnetic field in which a special levitating "float" module hovers. You can place your print directly on it or attach the model to it using a suitable mount.

1. Connect the base to the supplied power adapter (12 V / 2 A).
2. Place the float (or a model with the float inside) above the center of the base.
3. Slowly lower it and look for the point where the magnetic forces balance – you will feel a slight "catch" and the model will start to levitate.
4. Use touch on the base to switch LED lighting modes.

For easier placement, you can use an auxiliary printed holder from the official 3D models, which guides the float exactly to the center of the field.

---

Recommended use

• 3D printed lamps (moons, planets, decorative lights)
• Collectible figurines and statues
• Designer promotional and presentation objects
• Visually attractive STEM / educational projects to demonstrate magnetic levitation

Correct design and balancing of the model is important:

• center of gravity as close to the float as possible,
• lower center of gravity = more stable levitation and higher possible model weight,
• avoid metal objects near the base (approx. 20 cm).

---

Safety and recommendations

• Do not use near persons with a pacemaker or sensitive medical implants.
• Always use the supplied power adapter to prevent damage to the electronics.
• If the base heats up and shuts off (safety mode) after repeated levitation attempts, disconnect it and let it cool down for approx. 10–20 minutes.
• Do not tamper with internal trimmers and settings inside the base – incorrect adjustment can completely prevent levitation.
• Protect the kit from impacts and drops, especially the levitating float.

---

Package contents

• 1× Magnetic Levitation Base (levitation base ZC008)
• 1× Magnetic Levitation Float (levitation module)
• 1× 12 V / 2 A AC/DC adapter with detachable plug
• 1× 3D printed protective cover (shell) of the base/float
• Links to documentation, design guidelines, and 3D models (for download)

---

Technical specifications

Parameter	Value
Manufacturer	Bambu Lab
Manufacturer designation	B-ZC008
Product type	Magnetic Levitation DIY Kit
Power supply	DC 12 V / 2 A
Recommended levitation weight	approx. 80 g (without float)
Maximum levitation weight	approx. 200 g (without float)
Levitation activation	Automatic
LED control	Touch switch on the base
LED modes	cool white / warm white / warm yellow
Technology	electromagnetic induction
Protective cover	3D printed, included in the package

---

Who the kit is suitable for

• Owners of Bambu Lab 3D printers and other brands
• Makers, hobby electronics, DIY enthusiasts, and designers
• E-shops, studios, and presentations where a strong visual effect is important

With this kit you can easily turn an ordinary print into an eye-catching levitating decoration that will attract attention on any desk, at any exhibition, or trade fair.

Key features:

• Original Bambu Lab magnetic levitation DIY kit (B-ZC008) for 3D printed models
• Load capacity up to around 200 g (without float) with proper balancing of the model’s center of gravity
• Powered via DC 12 V / 2 A adapter – no batteries in the levitating part
• Integrated LED lighting with touch control and three color modes
• Quiet and stable magnetic levitation suitable for decorations, lamps, and figurines
• 3D printed protective cover for the base for easier first attempts and protection of components
• Official documentation, design guidelines, and 3D models for easy design of your own projects
• Ideal accessory for 3D printer owners and creators of original gifts and presentations