Bambu Lab HighFlow hotend FAH064 with a 0,6mm hardened steel nozzle enables a higher filament volumetric flow. It is particularly suitable for larger models and prints with extensive infill, where the higher flow rate can reduce print time.

Why choose a 0,6mm HighFlow hotend

• The optimized melt zone enables a higher filament volumetric flow.
• The 0,6 mm nozzle diameter is suitable for fast printing of larger parts.
• Hardened steel enables printing with selected abrasive filaments containing carbon or glass fibers.
• The Quick Swap design makes it easy to remove and install the hotend after releasing the latch.

Compatibility

The hotend is intended for Bambu Lab H2D, H2S, P2S and X2D 3D printers. Before ordering, check your printer model and the required nozzle diameter.

Materials and settings

The manufacturer states that the 0,6mm High Flow variant supports common materials as well as selected composite filaments marked CF or GF. Compatibility varies depending on the specific filament and printer, so always use the appropriate material profile.

Package contents

• 1 pc Bambu Lab HighFlow hotend with a 0,6mm hardened steel nozzle

What to consider before purchasing

The 0,6 mm diameter prioritizes flow and speed. If you print very small features and the finest details, a nozzle with a smaller diameter may be more suitable.