Overview

Anycubic UV Resin Standard Grey is a versatile photopolymer resin for desktop LCD/DLP printers with a wavelength of 365–405 nm. The improved formula brings noticeably higher toughness while maintaining high precision, lower shrinkage, and lower odor. The results are strong, less brittle prints with clean details and a smooth surface.

Key Benefits

• High toughness: higher resistance to impact and breaking.
• High precision and low shrinkage for sharp edges and fine details.
• Lower odor and easy cleaning with alcohol (IPA).
• Wide compatibility with both LCD and DLP printers (365–405 nm).

Who is it for

• Prototyping, modeling, figurines, technical parts, design and functional samples.
• Users looking for a reliable "daily" resin in neutral grey for perfect detail readability and easy painting.

Recommended Use

• Shake thoroughly before printing. Print in a well-ventilated area and use protective equipment.
• After printing, wash the model in isopropyl alcohol (IPA) and then cure in a UV chamber.

General Settings (approximate)

• Bottom layer exposure: 20–40 s
• Regular layer exposure: 1.5–3 s Actual values vary according to light source power, layer height, and printer optics – we recommend performing a short validation test.

Technical Parameters

Parameter	Value
Color	Grey
Volume/Weight	1 kg
Technology	LCD / DLP, UV 365–405 nm
Viscosity	250–350 mPa·s
Density	1.05–1.25 g/cm³
Hardness	80–83 Shore D
Tensile Strength	35–45 MPa
Elongation at Break	25–30 %
Flexural Strength	40–50 MPa
Flexural Modulus	1500–2100 MPa
Shrinkage during curing	4.3–5.6 %
Heat Deflection Temperature	60–65 °C
Recommended cleaning	IPA / alcohol
Shelf life	~1.5 years
Recommended use	For detailed models, prototypes, and figurines
These values are based on the manufacturer and official listing of the Czech seller.

Compatibility

• Compatible with most resin printers operating at 365–405 nm (LCD/DLP).

Safety and Storage

• Store in a closed bottle in a dark, cool place (approx. 15–35 °C).
• Protect from UV light; use gloves and ensure ventilation of the workspace.

Key features: Improved toughness and durability. High precision and low shrinkage for sharp details. Lower odor and easy cleaning with alcohol. Fast curing and smooth flow for reliable printing. Wide compatibility with LCD/DLP printers (365–405 nm).