Product description

Anycubic PLA in blue is a reliable and easy-to-use filament for precise, clean prints without warping. Thanks to its consistent diameter and careful winding, it ensures smooth feeding and stable results. The recommended temperature range of 190–230 °C and a slightly heated bed make setup easy on most FDM printers.

Why choose Anycubic PLA

• High precision winding and ±0.02 mm tolerance for reliable operation without clogs.
• Great printability: nozzle temperature 190–230 °C, bed ~55–56 °C; smooth surfaces and sharp details.
• Compatibility: works with most FDM/FFF printers and a recommended nozzle ≥0.4 mm.
• More eco-friendly choice: PLA based on lactic acid from renewable resources.

Printing tips

• Pre-drying: 45–50 °C for 6–8 h (for best results in higher-humidity environments).
• Recommended speeds: 50–200 mm/s depending on the model and printer.
• Cooling: for PLA, generally higher fan flow for better overhangs.
  These parameters help achieve clean edges, good layer adhesion, and minimal warping.

Technical data (selected)

• Diameter tolerance: ±0.02 mm
• Density: 1.24 g/cm³
• Melt flow index (190 °C / 2.16 kg): 4–10 g/10 min
• Vicat softening: 55 °C; heat deflection temperature (HDT): 54 °C
• Tensile strength: 48 ±5 MPa; tensile modulus: 2534 ±85 MPa
• Flexural strength: 90 ±3 MPa; flexural modulus: 3360 ±100 MPa
• Recommended nozzle: ≥0.4 mm
• Recommended nozzle temperature: 190–230 °C
• Recommended bed temperature: 55–56 °C
• Recommended print speed: 50–200 mm/s
• Pre-drying: 45–50 °C / 6–8 h
• Color: blue (manufacturer’s shade)
  All of the above figures are based on Anycubic’s official materials for the PLA range.

Applications

Suitable for functional prototypes, figurines, home accessories, teaching aids, and larger prints where ease of use and a nice surface finish are key.

Key features:
Easy printing with no odor and minimal warping
Highly consistent winding and ±0.02 mm precision
Wide temperature range of 190–230 °C for versatile use
Good layer adhesion and a smooth surface finish
Compatible with most FDM printers and ≥0.4 mm nozzles
Made from renewable resources – a more eco-friendly choice