Anycubic PLA Basic – White, 1 kg

Reliable and affordable PLA filament for everyday 3D printing. Thanks to ±0.02 mm precision, consistent diameter, and neat winding, it prints easily and delivers smooth surfaces without clogging or bubbles. Ideal for prototypes, decorations, and educational models.

Why choose this filament

• Diameter precision ±0.02 mm for smooth feeding and fine detail quality.
• Neat winding minimizes tangles and print interruptions.
• Broad compatibility with all common FDM printers.
• Recommended settings 200–210 °C (nozzle) and 55–65 °C (bed) for hassle-free results.
• Lactic acid–based material (PLA) – easy processing and a nice surface finish.

Recommended print settings

• Nozzle: 200–210 °C (possible range 190–230 °C depending on printer and speed)
• Heated bed: 55–65 °C (some profiles allow approx. 50–80 °C)
• Recommended speed: 50–200 mm/s
• Max volumetric flow: 12 mm³/s
• Drying before printing: 45–50 °C for 6–8 hours (if the filament absorbed moisture)
  Tip: For faster printing, increase temperature within the recommended range and adjust flow; for the best surface finish, choose lower speeds.

Verified technical data

• Diameter: 1.75 mm • Tolerance: ±0.02 mm
• Density: 1.24 g/cm³ • Hardness: Shore D 81
• Tensile strength: 48 ±5 MPa
• Spool length: approx. 330 m
• Packaging: vacuum-sealed with desiccant
• EAN: 6974662352026
  The listed values are according to official materials and the European product page of Anycubic and the distributor.

Compatibility

• Suitable for most FDM/FFF 3D printers using PLA and a standard 0.4 mm nozzle or larger.
• Easy to profile in PrusaSlicer, Cura, or OrcaSlicer – start from the “PLA Generic” profile and adjust temperatures as recommended above.

Specification table

Key features:
Clean winding minimizes tangles and ensures stable printing.
Accuracy ±0.02 mm for consistent results and quality surfaces.
Easy setup – recommended 200–210 °C on the nozzle, 55–65 °C on the bed.
Good layer adhesion and low warping – ideal for beginners and advanced users alike.
Wide compatibility with most 1.75 mm FDM printers.
Vacuum packaging with desiccant for moisture protection.