Anycubic Photon Mono 4 – precise MSLA printing for detailed models

The Anycubic Photon Mono 4 is a compact next‑generation resin (MSLA/LCD) 3D printer with a 10K monochrome 7" display. Thanks to the XY pixel 17 × 17 µm, improved parallel matrix light, and laser‑engraved platform 2.0, it achieves sharp edges and repeatable results even on small parts. The build volume of 153.4 × 87 × 165 mm (2.2 l) covers most hobby and custom projects.

Why choose the Photon Mono 4

• 10K mono LCD (7") with XY 17 µm for top‑tier detail.
• Fast printing: up to ≤50 mm/h with standard resin, up to ≤70 mm/h with high‑speed resin.
• Parallel matrix light source for uniform curing and smooth surfaces.
• Laser‑engraved platform 2.0 for reliable adhesion.
• Simple 4‑point manual leveling and control via a 2.8" touch display.
• Compatibility with common 405 nm resins (standard, water‑washable, ABS‑like, bio/plant‑based).

Key parameters

• Build volume: 153.4 × 87 × 165 mm (2.2 l)
• Layer height: 0.03–0.15 mm
• Light: parallel matrix, intensity ~3000 μW/cm², uniformity 80–90 %
• Z‑axis: single linear guide rail, accuracy 30 μm
• Film: FEP, LCD protective film included
• Connectivity: USB (offline printing); Anycubic App not supported
• Printer display: 2.8" TFT
• Device dimensions: 230 × 235 × 391 mm, weight 4 kg (package 5.7 kg)
• Power draw: 54 W
  These specifications are based on the manufacturer’s official materials.

Comparison: Photon Mono 4 vs. Photon Mono 4 Ultra (brief)

• Speed: Mono 4 up to 50/70 mm/h (standard/high‑speed resin) vs. Ultra up to 80/120 mm/h.
• Light system: Mono 4 – parallel matrix; Ultra – COB + Fresnel + algorithm (higher uniformity ≥90%).
• Control and connectivity: Mono 4 – 2.8" display, USB; Ultra – 4.3" display, USB + Wi‑Fi/LAN, smart assists.
• All other key parameters (7" 10K, XY 17 µm, volume) similar.

What’s in the box

• Anycubic Photon Mono 4 printer, build platform, resin vat, USB drive, LCD protective film, scraper, funnels, hex keys, power cable, manual, and leveling aids. Contents may vary by region.

Compatible accessories

• Anycubic AirPure (activated carbon – optional accessory) to reduce odor in an enclosed space.

Important notes

• The printer does not support power‑loss resume or Wi‑Fi; printing is via USB.

Tip for best results: For faster printing and lower suction forces, use a “high‑speed” resin and recommended layer heights of 0.05–0.1 mm; for maximum detail choose 0.03 mm and lower exposure speeds according to the profile in Photon Workshop.

Key features:
10K 7" mono LCD with XY 17 µm for outstanding detail
Build volume 153.4 × 87 × 165 mm (2.2 l) in a compact body
Speeds up to 50–70 mm/h depending on resin
Parallel matrix light source for uniform exposure
Laser‑engraved platform 2.0 for secure adhesion
Easy 4‑point leveling, 2.8" touch control
Reliable offline USB printing, compatibility with common 405 nm resins
LCD protective film included and easy maintenance (FEP)