Anti-vibration feet H2D / H2S / H2C

Anti-vibration feet are designed for 3D printers of the Bambu Lab H2 series – models H2D, H2S, and H2C. Thanks to their special elastomer construction, they effectively dampen vibrations transmitted from the printer to the table or floor.

At high printing speeds and dynamic axis movements, vibrations can be transmitted to surrounding furniture, resulting in increased noise levels and, in some cases, a slight deterioration in the surface quality of prints. Properly designed anti-vibration feet significantly limit these phenomena.

Main advantages

• Reduction of vibration and noise when printing on tables, shelves, and lighter structures
• Better printer stability during high speeds and accelerations of the H2 series
• Protection of furniture surfaces from dents and scratches
• Compatibility with H2D, H2S, and H2C models without frame modifications
• Easy installation – replacement of original feet without the use of special tools
• Durable rubber material suitable for long-term 3D printer operation

Usage

We recommend anti-vibration feet especially if:

• the printer stands on a lighter table, IKEA table, or thin board that tends to resonate,
• you frequently print at higher speeds, typical for Bambu Lab H2,
• the printer is located in an apartment, office, or shared space where noise is an important factor,
• you want to minimize vibration transmission to lower floors (for example, in apartment buildings).

Package contents

• 4× anti-vibration foot for Bambu Lab H2D / H2S / H2C 3D printers

Installation

1. Turn off the printer and disconnect it from the power supply.
2. Carefully lift one side of the printer.
3. Remove the original foot and attach the new anti-vibration one.
4. Repeat the process on all corners.
5. Check that the printer stands stably and all feet are in contact with the surface.

It is recommended to place the printer on a solid, level surface so that the anti-vibration rubber can work effectively and avoid unwanted wobbling.

Material and construction

The feet are made of highly durable rubber / elastomer, which has an optimal ratio between softness and stiffness. This achieves:

• effective damping of low-frequency vibrations generated during axis movement,
• sufficient load capacity for the weight of the Bambu Lab H2 printer (approx. 30+ kg),
• long lifespan even during continuous operation.

Anti-vibration feet H2D / H2S / H2C are a simple and affordable accessory that increases the comfort of 3D printer operation and can contribute to more stable print quality, especially in less ideal conditions (light tables, apartment buildings, shared offices).

Key features:

• Designed for Bambu Lab H2D, H2S, and H2C 3D printers
• Significant reduction of vibration transmission to the table and structure
• Helps limit noise during printing at higher speeds
• Protection of furniture surface from damage by printer feet
• Simple and quick installation without tools
• Durable rubber material with long lifespan